At a glance
- Holding Force
- 280 kg x 2 (per leaf)
- Supply Voltage
- 12 V or 24 V DC (selectable)
- Current Draw
- 500 mA x 2 at 12 V, 250 mA x 2 at 24 V
- Status Output
- Dry contact, 3 A max
- Fail Mode
- Fail-safe
- Suitable Door
- Wooden, glass, metal, fire doors
Model EL-600DMORX 600 lbs Double Door EM Lock with Timer and Feedback
₹4,149 Incl. GST
₹3,516 + 18% GST
At a glance
- Holding Force
- 280 kg x 2 (per leaf)
- Supply Voltage
- 12 V or 24 V DC (selectable)
- Current Draw
- 500 mA x 2 at 12 V, 250 mA x 2 at 24 V
- Status Output
- Dry contact, 3 A max
- Fail Mode
- Fail-safe
- Suitable Door
- Wooden, glass, metal, fire doors
EM lock for double doors: two magnets in one 500 mm housing lock both leaves together and release on a signal from the access system. Holds 280 kg per leaf, runs on 12 or 24 V DC, with a status output, for glass, wooden and metal doors.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX 600 lbs Double Door EM Lock with Timer and Feedback (model EL-600D) puts two electromagnets in one 500 mm housing so a single unit locks both leaves of a double door. Each magnet holds its own armature plate at 280 kg, both release the moment power is cut or the access system signals, and a status output tells the controller whether the door is locked. It suits double glass entrance doors, conference room doors and corridor doors on card, PIN or fingerprint access control.
Is it right for you?
- It suits a double door where one unit, one cable run and one set of brackets is simpler than two single locks.
- It suits wooden, glass, metal and fire doors.
- It suits 12 V or 24 V DC systems: the supply voltage is selectable.
- If the two leaves must be controlled separately, use two single 600 lbs EM Locks with Timer and Feedback instead.
Key features
- Holding force 280 kg per door leaf, from two magnets.
- Supply 12 V or 24 V DC, selectable; each magnet draws 500 mA at 12 V or 250 mA at 24 V, so 1 A in total at 12 V.
- Signal output: dry contact rated 3 A, for door alarms on a controller or alarm panel.
- Housing 500 x 48.5 x 25 mm; two armature plates, each 180 x 38 x 11 mm.
- Anodised aluminium shell with zinc-finished magnets and armatures; weight 4 kg.
- Rated -10 to 55 °C and 0 to 90% humidity, non-condensing.
What else you need
- A regulated 12 V or 24 V DC supply rated for at least 1 A at 12 V, such as a 12 V DC box power supply rated 3.5 A.
- An access controller, standalone reader or exit button that switches the lock supply.
- A MORX exit button to release both leaves from inside.
- A fire alarm interface to cut lock power where required.
Installation
An access control installer should mount the housing centrally on the frame header so each magnet lines up with its door leaf, fit an armature plate to each leaf so they meet the magnets squarely, select 12 V or 24 V to match the supply and wire the signal output to the controller. Size the supply for both magnets.
Before you buy
- Separate control of each magnet is not stated: treat it as one lock for both leaves.
- The supply must cover both magnets: 1 A at 12 V.
- Both leaves open whenever power is cut, so add battery backup if the door must stay locked.
Technical specifications
Key facts
- What is it?
- Magnetic / EM LocksBrand MORX, model EL-600D
- How is it powered?
- 12 or 24 V DC (selectable)
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- box contents
General
- Model
- EL-600D
- Holding Force
- 280 kg x 2 (per leaf)
- Fail Mode
- Fail-safe (electromagnetic)
- Current Draw
- 500 mA x 2 at 12 V, 250 mA x 2 at 24 V
- Status Output
- Dry contact, 3 A max
- Suitable Door
- Wooden, glass, metal, fire doors
- Supply Voltage
- 12 V or 24 V DC (selectable)
Environment
- Operating Temperature
- -10 to 55 °C
- Operating Humidity
- 0 to 90% RH, non-condensing
Physical
- Lock Body Dimensions
- 500 x 48.5 x 25 mm
- Armature Plate Dimensions
- 180 x 38 x 11 mm (x 2)
- Material
- Anodised aluminium shell; zinc-finished magnets and armatures
- Weight
- 4 kg
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Door Material | Framed Glass, Metal, Wood |
Works with this product
Relevant accessories
- MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)MS-1
Why Exit button to release both leaves. Condition: Button switches the shared lock supply or controller input.
₹368Add to cart - MORX Box+SMPS Metal Enclosure with 12 V 3.5 A Power Supply for Access PanelsMORX-BOX-SMPS
Why 12 V DC supply for both magnets. Condition: Lock 1 A total at 12 V; supply 3.5 A at 12 V.
₹5,210Add to cart
Replacements and alternatives
- MORX 600 lbs EM Lock with Timer and FeedbackEL-600
Why Single-door MORX 600 lbs EM lock with timer and feedback. Condition: Use two singles if leaves need separate control.
₹2,267Add to cart
Questions about this product
Can the two doors be released separately?
Separate control of each magnet is not stated. Treat it as one lock for both leaves, or use two single EM locks if the leaves must be controlled independently.
What power does it need?
12 V or 24 V DC, selectable. Each magnet draws 500 mA at 12 V, so size the supply for at least 1 A at 12 V.
What happens in a power cut?
Both magnets release and both leaves open. Use a backed-up supply if the door must stay locked.
Which doors does it suit?
Wooden, glass, metal and fire double doors.
What does the feedback output do?
It is a dry contact rated 3 A that reports lock status to an access controller or alarm panel.
Ask about this modelDoor fit, access methods, installation
Answers are automated. Do not enter personal or account details.