Online checkout is currently closed. Browse products, build your list and request a quotation. Need help? Call or WhatsApp us.Online checkout is currently closed. Call or WhatsApp for enquiries.

  • Sold by Sada Smart Solutions LLP, GSTIN 29AEJFS5796N1ZTSada Smart Solutions LLP

Call or WhatsApp +91 96060 62750 / 62751, Mon to Sat, 9:00 AM to 6:30 PM

MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)
MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)
MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)
MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)

At a glance

Contact Output
NO / NC / COM
Contact Rating
3 A at 36 V DC max
Panel Material
Stainless steel
Dimensions
92 x 28 x 25 mm
Switch Withstand Voltage
250 V
Suitable Door
Hollow door frame
MORX logoModel MS-1

MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)

₹368 Incl. GST

₹312 + 18% GST

At a glance

Contact Output
NO / NC / COM
Contact Rating
3 A at 36 V DC max
Panel Material
Stainless steel
Dimensions
92 x 28 x 25 mm
Switch Withstand Voltage
250 V
Suitable Door
Hollow door frame

Slim push button fitted inside an access-controlled door so people can leave without a card or fingerprint. Stainless steel, 92 x 28 mm for hollow door frames, with NO, NC and COM contacts rated 3 A at 36 V DC.

Add to quote
Ask for helpDoor fit, entry methods and fitting requirements.

Overview

The MORX MS-1 is a slim push button fitted on the inside of an access-controlled door so people can leave without presenting a card, PIN or fingerprint. A press signals the controller, or interrupts the lock supply directly. Its narrow stainless steel plate of 92 x 28 x 25 mm fits hollow door frames too narrow for a square switch plate, beside office, apartment, shop and server-room doors.

Is it right for you?

  • Suits a narrow aluminium or steel door frame where there is no wall space for a square plate.
  • Suits any door with an electromagnetic (EM) lock, drop bolt or electric strike and a controller that takes a dry-contact exit input.
  • Suits direct wiring in series with a fail-safe lock supply, thanks to the NC contact.
  • For a wall beside the door, the MORX MS-2 is the square-plate version. For hands-free exit, the MORX MNT-2 no-touch button has the same contact format but needs a 12 V supply.

Key features

  • Normally open (no), normally closed (nc) and common (com) contacts, for a controller exit input or a lock power circuit.
  • Contact rating of 3 A at 36 V DC maximum, with a 250 V switch withstand voltage.
  • Automatic reset after every press.
  • Stainless steel panel with a 23 x 2 mm protruding button.
  • Rated for 0 to 95% relative humidity; weight 0.18 kg.

What else you need

  • An access controller or standalone reader with an exit input, or a lock supply circuit to switch.
  • A two-core cable for NO and COM, or a three-core cable if the NC contact is also used.
  • No power supply: it is a plain switch with no electronics.

Installation

An access control installer or electrician should fit it. The switch body and its screw terminals need a cavity behind the plate, as it is made for hollow door frames. Two screws fix the plate, and the cable is run to the controller exit input or the lock circuit. Keep the switched current within 3 A at 36 V DC.

Before you buy

  • Made for hollow door frames: a solid wall needs a back box or the MORX MPSM-1 with its own back box.
  • Keep the load within the 3 A at 36 V DC contact rating; a lock that draws up to 3 A should be switched through a controller or relay.

Technical specifications

Key facts

What is it?
Exit buttonBrand MORX, model MS-1
Can SecurityGearHub help with installation?
Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
Which documents are available?
On request. Ask us for the datasheet.

RelatedGuideAccess control door setup checklistDocumentsAll MORX documents

Button Type
Mechanical push button, automatic reset
Contact Output
NO / NC / COM
Contact Rating
3 A at 36 V DC max
Switch Withstand Voltage
250 V
Panel Material
Stainless steel
Dimensions
92 x 28 x 25 mm
Protruding Button
23 x 2 mm
Suitable Door
Hollow door frame
Operating Humidity
0 to 95% RH
Weight
0.18 kg
Warranty
Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
Brand

MORX

Works with this product

Relevant accessories

  • MORX 600 lbs EM Lock with Timer and FeedbackEL-600

    Why Exit button to release a 600 lbs EM lock from the inside. Condition: Wire the button to the controller exit input, or in series with the lock supply for a fail-safe lock; keep the switched load within the button contact rating.

    ₹2,267Add to cart

Replacements and alternatives

Questions about this product

Can the MS-1 cut power to an EM lock directly without a controller?

Yes, if the lock supply is wired through the NC contact, which opens when the button is pressed. The load must stay within the 3 A at 36 V DC contact rating.

Does it need power?

No. It is a plain mechanical switch with no electronics.

Which controllers does it work with?

Any access controller, standalone reader or lock power circuit that expects a dry-contact exit input.

Will it fit a narrow door frame?

Yes. The plate is 92 x 28 mm and is made for hollow door frames, with a cavity behind for the switch body.

Ask about this modelDoor fit, access methods, installation

Answers are automated. Do not enter personal or account details.

₹368incl. GST