At a glance
- Fail Mode
- Fail-secure
- Supply Voltage
- 9 to 12 V DC
- Working Current
- 1.5 to 3 A
- Cylinder
- Double
- Backset
- 60 mm
- Finish
- Nickel plating
In the box
- Electric rim lock body
- Strike
- 3 x Key
MORX Electric RIM Lock, Fail Secure
₹2,310 Incl. GST
₹1,958 + 18% GST
At a glance
- Fail Mode
- Fail-secure
- Supply Voltage
- 9 to 12 V DC
- Working Current
- 1.5 to 3 A
- Cylinder
- Double
- Backset
- 60 mm
- Finish
- Nickel plating
Surface-mounted electric lock for main doors, gates and grille doors, often paired with a video door phone or access reader. Latches when the door closes and releases at 9 to 12 V DC, with a double key cylinder, 3 keys and a 60 mm backset.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX Electric RIM Lock is a surface-mounted lock for main doors, gates, grille doors and shop back doors, often paired with a video door phone or access reader. It latches when the door closes and releases when 9 to 12 V DC is applied, and a double key cylinder with three keys opens it by hand from either side. It is fail-secure, so the door stays locked in a power cut.
Is it right for you?
- Suits residential main doors, gates, grille doors and apartment entrances where a mortise lock or electromagnetic (EM) lock is not practical.
- Suits doors that must stay locked when power fails, with keys as the manual override.
- Needs a supply able to give up to 3 A when it releases, so it is not for small plug-in adaptors.
- If the door already has a mechanical lockset, the MORX electric strike is a lower-current alternative.
Key features
- Fail-secure: latches as the door closes, releases on 9 to 12 V DC, stays locked in a power cut.
- Working current 1.5 to 3 A, 10 W, so the supply and cable must be sized for the peak.
- Double key cylinder with 3 keys, giving a manual override from both sides.
- Backset 60 mm; lock body 148 x 107 x 55 mm; body and strike 2.0 mm thick with a nickel-plated finish.
- Service life of 1,000,000 cycles.
- Rated for -40 to 50 °C; weight approx. 1.8 kg.
What else you need
- A 12 V DC supply able to deliver 3 A, such as the MORX Box+SMPS (12 V, 3.5 A), dedicated to the lock.
- A controller, standalone reader, video door phone or exit button with a relay output to release it. An exit button such as the MORX MS-1 should drive a controller or relay input rather than switch the lock directly, because the lock current is at the limit of the button’s 3 A rating.
Installation
A locksmith or access control installer should fit it. The lock body is screwed to the inside face of the door and the strike to the frame, so no mortise pocket is cut; the door is drilled only for the key cylinder and the cable. Use a supply and cable sized for up to 3 A and keep the cable run short.
Before you buy
- The release current is high (up to 3 A): size the supply and cable for the peak and keep runs short.
- Fail-secure only: the door stays locked without power, and the keys are the way in.
- Check the 60 mm backset against the door stile.
Technical specifications
Key facts
- What is it?
- Electric Strikes & Rim LocksBrand MORX
- How is it powered?
- 9 to 12 V DC
- What comes in the box?
- Electric rim lock body; Strike; 3 x Key
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
RelatedGuideAccess control door setup checklistDocumentsAll MORX documents
General
- Fail Mode
- Fail-secure
- Working Current
- 1.5 to 3 A
- Cylinder
- Double
- Keys
- 3
- Locking Method
- Latches on door closing
- Service Life
- 1,000,000 cycles
Input
- Supply Voltage
- 9 to 12 V DC
- Power Consumption
- 10 W
Environment
- Operating Temperature
- -40 to 50 °C
Physical
- Backset
- 60 mm
- Lock Body Dimensions
- 148 x 107 x 55 mm
- Body and Strike Thickness
- 2.0 mm
- Finish
- Nickel plating
- Weight
- Approx. 1.8 kg
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|
Works with this product
Relevant accessories
- MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)MS-1
Why Exit button to release the latch. Condition: Wire the button to a controller or relay input; the lock draws 1.5 to 3 A, at the limit of the button 3 A rating, so do not switch the lock directly through the button.
₹368Add to cart - MORX Box+SMPS Metal Enclosure with 12 V 3.5 A Power Supply for Access PanelsMORX-BOX-SMPS
Why 12 V DC supply. Condition: Lock draws 1.5 to 3 A; supply rated 3.5 A at 12 V; dedicate it to the lock.
₹5,210Add to cart
Replacements and alternatives
- MORX Electric Strike Lock, Fail SecureSUP-MORX-STRIKE-LOCK-FAIL-SECURE
Why MORX fail-secure electric strike. Condition: Needs an existing mechanical lockset.
₹2,224Add to cart
Questions about this product
Can it be opened with a key?
Yes. It has a double key cylinder and comes with three keys, so it opens by hand from either side.
What happens in a power cut?
The door stays locked, as the lock is fail-secure. Use the key to open it.
What power does it need?
9 to 12 V DC with a supply able to deliver 3 A, since it draws 1.5 to 3 A when it releases.
Does it work with a video door phone?
Yes, with any video door phone, reader or controller that has a lock relay output and a supply sized for the lock.
Does it need a pocket cut in the door?
No. It is surface mounted on the inside of the door; the door is drilled only for the key cylinder and cable.
Ask about this modelDoor fit, access methods, installation
Answers are automated. Do not enter personal or account details.