At a glance
- Power Supply
- 12 V DC
- Reading distance
- Up to 3 m
- Dimensions
- 160 x 130 x 21 mm
- Protocol
- ISO 18000-6C (EPC Gen2)
Model RFG-CR03MORX RFG-CR03 UHF RFID Integrated Reader
₹16,083 Incl. GST
₹13,630 + 18% GST
At a glance
- Power Supply
- 12 V DC
- Reading distance
- Up to 3 m
- Dimensions
- 160 x 130 x 21 mm
- Protocol
- ISO 18000-6C (EPC Gen2)
Slim UHF RFID reader for gates and short lanes that identifies tagged vehicles or people at short to medium range. Built-in 8 dBi circular antenna, Wiegand 26/34, RS232 and RS485, with network, Wi-Fi and relay as options, 12 V DC.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX RFG-CR03 is a slim UHF (ultra high frequency) RFID (radio frequency identification) reader for gates and short lanes, identifying tagged vehicles or people at short to medium range. Its 8 dBi circularly polarised antenna sits in a 160 x 130 x 21 mm housing that mounts on a wall, pillar or gate post. It suits building and parking access points where a driver or walker holds a UHF card or passes a tag close to the reader, as well as weighbridge entries, small barrier lanes and warehouse checkpoints.
Is it right for you?
- It suits a place where a controlled, short read zone is wanted, so tags in nearby lanes are not picked up.
- It suits pedestrian or slow vehicle gates where the card or tag is presented close to the reader.
- It suits outdoor mounting: rated -20 to 70 °C and 20 to 95% humidity, non-condensing.
- For moving vehicles at longer distance, the RFG-CR06 or RFG-CR15 fits better.
Key features
- Reads ISO 18000-6C (EPC Gen2) tags, with group reading of more than 50 tags.
- 8 dBi circularly polarised antenna built in, so tag orientation matters less.
- RF power 0 to 30 dBm with frequency hopping (FHSS) or fixed frequency, so the read zone can be tuned.
- Wiegand 26/34, RS232 and RS485 as standard; RJ45 network, Wi-Fi and relay as options.
- Frequency plans for 920 to 925 MHz, 902 to 928 MHz or 865 to 868 MHz, customised to order.
- Under 1 W power use, with a beep or LED prompt on each read.
What else you need
- A 12 V DC power supply.
- An access panel or barrier controller with a Wiegand input, or a PC on RS232 or RS485.
- UHF cards or windshield tags, and a desktop reader such as the RFG-WD01 to enrol them.
Installation
An access control installer should mount it on the wall, pillar or gate post where the card or tag is presented, wire the Wiegand or serial output to the controller and connect the 12 V DC supply. Set the RF power low enough that only tags at the gate are read.
Before you buy
- Read range depends on the tag; ask us for the figure that applies to your tags.
- State the frequency plan and any optional interface (RJ45, Wi-Fi or relay) on the order.
Technical specifications
Key facts
- What is it?
- Long-Range Vehicle AccessBrand MORX
- How is it powered?
- 12 V DC
- Does it support RS-485?
- Yes
- Does it support Wiegand?
- Yes26, 34-bit
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- outdoor rating, box contents
RelatedDocumentsAll MORX documents
General
- Model / configuration
- RFG-CR03
- Features and configuration
- 3 Mtr Integrated RFID Reader - Reading distance: 0~06 m (depending on tag) - 8 dBi circularly polarized antenna - Communication: RS232, Wiegand and Trigger and Relay
- Reading distance
- Up to 3 m (depends on tag)
- Communication
- RS232, Wiegand and Trigger and Relay
- Protocol
- ISO 18000-6C (EPC Gen2)
- Frequency
- 920 to 925 MHz, 902 to 928 MHz or 865 to 868 MHz (customised)
- Antenna
- 8 dBi circular, built-in
- RF Power
- 0 to 30 dBm, adjustable
- Multi-Tag Reading
- More than 50 tags
- Interfaces
- Wiegand 26/34, RS232, RS485; RJ45, Wi-Fi, relay optional
Input
- Power Supply
- 12 V DC
- Power Consumption
- Under 1 W
Environment
- Operating Temperature
- -20 to 70 °C
- Operating Humidity
- 20 to 95% RH, non-condensing
Physical
- Dimensions
- 160 x 130 x 21 mm
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Connectivity | Wiegand, RS-485 |
Questions about this product
Can it be used outdoors?
Yes. It is rated -20 to 70 °C and 20 to 95% humidity, non-condensing.
What power does it need?
12 V DC, using under 1 W.
How does it connect to my access system?
Wiegand 26/34 to an access panel or barrier controller, or RS232 or RS485 to a PC. RJ45, Wi-Fi and a relay are options.
Which tags does it read?
ISO 18000-6C (EPC Gen2) UHF cards and tags.
Will it pick up cars in the next lane?
It is designed for a short, controlled read zone, and the RF power is adjustable so the zone can be kept tight.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.