Long-Range Vehicle Access
Give registered vehicles hands-free entry with a long-range UHF RFID reader and windshield tags. Choose a ZKTeco UHF or MORX RFG reader, then tags in windshield, paper, tamper-proof or bike formats for housing societies, campuses, factories and office car parks.
All products
-
MORXALN9654 UHF RFID Windshield Paper Tag with 3M Adhesive
- Read Range
- Up to 12 m
- Ingress Protection
- IP65
₹27 Incl. GSTRoll of 2,500 -
MORXRFG Tamper-Proof UHF RFID Windshield Tag
- Chip
- Impinj RAIN RFID
- Write Range
- Up to 6 m
- Write Endurance
- 100,000 cycles
₹60 Incl. GSTRoll of 1,000 -
MORXModel RFG-CR03UHF RFID Integrated Reader
- Protocol
- ISO 18000-6C (EPC Gen2)
- Antenna
- 8 dBi circular, built-in
- RF Power
- 0 to 30 dBm, adjustable
₹16,083 Incl. GST -
MORXModel RFG-CR066 m UHF RFID Long-Range Reader
- Ingress Protection
- IP66
- Protocol
- ISO 18000-6C (EPC Gen2)
- Antenna
- 9 dBi linear, built-in
₹17,024 Incl. GST -
MORXModel RFG-CR1515 m UHF RFID Long-Range Reader
- Ingress Protection
- IP66
- Protocol
- ISO 18000-6C (EPC Gen2)
- Antenna
- 8 dBi circular, built-in
₹23,997 Incl. GST -
MORXModel RFG-CR20UHF RFID Long-Range Reader
- Antenna
- 9 dBi circular, built-in
- RF Power
- 0 to 33 dBm, adjustable
- Multi-Tag Reading
- More than 200 tags
₹27,462 Incl. GST -
MORXModel RFG-CR32UHF RFID Reader for Boom Barriers
- Output Power
- Up to 26 dBm, adjustable
- Work Mode
- Active, trigger, answer
- Power Supply
- 9 V DC
₹30,362 Incl. GST -
MORXModel RFG-HR15TUHF RFID Reader for Toll Plazas
- Ingress Protection
- IP66
- Antenna
- 9 dBi circular, built-in
- Output Power
- 0 to 30 dBm, adjustable
₹48,764 Incl. GST -
MORXModel RFG-HR18UHF RFID Project Reader
- Frequency
- 865 to 867 MHz
- Chipset
- Impinj E310 / QM100
- Antenna
- 9 dBi circular, built-in
₹27,034 Incl. GST -
MORXModel RFG-WD01UHF RFID Desktop Reader/Writer (USB)
- Reading Range
- Up to 25 cm
- Protocol
- EPC C1G2 / ISO 18000-6C
- Power Supply
- USB, 3 to 7 V DC
₹13,602 Incl. GST -
ZKTecoModel UHF-306UHF, 306 Long-Range UHF RFID Reader
- Reading Distance
- 0 to 6 m
- Ingress Protection
- IP65
Price on request -
ZKTecoModel UHF-312UHF, 312 Long-Range UHF RFID Reader
- Reading Distance
- 0 to 12 m
- Ingress Protection
- IP65
Price on request -
ZKTecoModel UHF406UHF, 406 Long-Range UHF RFID Reader
- Reading Distance
- 0-5m
- Working Voltage
- 100-240V, DC+12 V
- Reading Speed
- Under 6 ms
Price on request -
ZKTecoModel UHF-412UHF, 412 Long-Range UHF RFID Reader
- Reading Distance
- 0-12m
- Ingress Protection
- IP68
Price on request -
MORX
RFG UHF RFID Bike Windshield Paper Tag
- Read Range
- Up to 5 m
- Frequency
- 860 to 960 MHz
Price on request -
MORX
UHF RFID 3M Windshield Tag
- Read Range
- 10 to 15 m
- Frequency
- 840 to 960 MHz
Price on request
How to choose a UHF RFID reader for vehicles
A UHF system reads a tag on the windscreen as the car approaches and opens the barrier without the driver stopping. Get these points right:
- Read range: match the range to the lane. Too short and drivers must stop, too long and the reader may pick up cars in the next lane or the queue behind.
- Frequency band: readers and tags must use the same band, and the permitted band depends on the country, so check the reader and tag frequency against local radio rules.
- Tag type: tamper-proof tags break if peeled off, which stops residents moving one tag between vehicles. Paper windshield tags suit large fleets, and bike tags fit two-wheelers.
- Windscreen film: metallic sun-control films can block UHF signals, so test on real vehicles.
- Output: confirm the reader's Wiegand or network output works with your access controller.
Pair the reader with a boom barrier, or consider ANPR / LPR where tags are impractical.
Need help choosing?
Tell us what it is for and where it goes, and we suggest models. Have a list of models and quantities? Request a quote.