At a glance
- Power Supply
- 12 V, 2 A
- Reading distance
- 0~06 m
- Ingress Protection
- IP66
- Dimensions
- 180 x 180 x 47 mm
Model RFG-CR06MORX RFG-CR06 6 m UHF RFID Long-Range Reader
₹17,024 Incl. GST
₹14,427 + 18% GST
At a glance
- Power Supply
- 12 V, 2 A
- Reading distance
- 0~06 m
- Ingress Protection
- IP66
- Dimensions
- 180 x 180 x 47 mm
UHF RFID reader for vehicle and asset identification at parking gates, boom barriers and dock doors, reading windshield tags at up to about 6 m. Built-in 9 dBi antenna, IP66 housing, RS232, Wiegand, trigger input and relay output.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX RFG-CR06 is a UHF (ultra high frequency) RFID (radio frequency identification) reader that identifies tagged vehicles or goods at up to about 6 m, depending on the tag. Its 9 dBi antenna is built into a 180 x 180 mm IP66 housing, and it passes the tag number to a barrier controller or access panel. It suits a car park gate, a boom barrier lane or a dock door where the vehicle slows at the barrier.
Is it right for you?
- It suits a single lane where the vehicle slows at the barrier and about 6 m of range is enough.
- It suits permanent outdoor mounting: IP66 and rated -20 to 70 °C, 20 to 95% humidity, non-condensing.
- For wider or faster lanes, the RFG-CR15 or RFG-CR20 read further.
- For a controlled short read zone at a pedestrian gate, the RFG-CR03 is the smaller choice.
Key features
- Reads ISO 18000-6C (EPC Gen2) tags at 0 to about 6 m, depending on the tag.
- Reads more than 50 tags as a group.
- 9 dBi linear antenna built in, so no separate antenna.
- RF power adjustable from 0 to 30 dBm, so the read zone can be tuned to the lane.
- 865 to 867 MHz as standard; other bands can be customised.
- RS232, RS485 and Wiegand 26/34 as standard, with a trigger input and relay output; RJ45, Wi-Fi and GPRS mobile data as options.
- Power consumption under 1 W; 180 x 180 x 47 mm, 900 g.
What else you need
- A 12 V, 2 A power supply.
- A barrier controller or access panel with a Wiegand input, or a PC on RS232 or RS485.
- UHF windshield tags for each vehicle and a desktop reader such as the RFG-WD01 to enrol them.
Installation
A barrier or access control installer should mount it on a pole or wall beside the lane facing approaching windshields, wire the Wiegand or relay output to the controller and connect the 12 V supply. Adjust the RF power so only vehicles in the lane are read.
Before you buy
- State any optional interface (RJ45, Wi-Fi or GPRS) on the order.
- Other frequency bands are customised, so tell us if 865 to 867 MHz is not the band you need.
Technical specifications
Key facts
- What is it?
- Long-Range Vehicle AccessBrand MORX
- How is it powered?
- 12 V, 2 A
- Does it support Wiegand?
- Yes
- Can it be used outdoors?
- IP66
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- box contents
RelatedSolutionParking and vehicle entranceDocumentsAll MORX documents
General
- Model / configuration
- RFG-CR06
- Features and configuration
- 6 Mtr Integrated RFID Reader - Reading distance: 0~06 m (depending on tag) - 9 dBi linear polarized antenna - Communication: RS232, Wiegand and Trigger and Relay for Industrial Use
- Reading distance
- 0~06 m (depending on tag)
- Communication
- RS232, Wiegand and Trigger and Relay for Industrial Use
- Protocol
- ISO 18000-6C (EPC Gen2)
- Frequency
- 865 to 867 MHz (other bands customised)
- Antenna
- 9 dBi linear, built-in
- RF Power
- 0 to 30 dBm, adjustable
- Multi-Tag Reading
- More than 50 tags
Input
- Power Supply
- 12 V, 2 A
- Power Consumption
- Under 1 W
Environment
- Ingress Protection
- IP66
- Operating Temperature
- -20 to 70 °C
- Operating Humidity
- 20 to 95% RH, non-condensing
Physical
- Dimensions
- 180 x 180 x 47 mm
- Weight
- 900 g net
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Connectivity | Wiegand |
| IP Rating | IP66 |
Questions about this product
How far does it read?
Up to about 6 m, depending on the tag.
Can it be used outdoors?
Yes. It is IP66 and rated -20 to 70 °C.
What power does it need?
12 V, 2 A, drawing under 1 W.
How does it connect to the barrier?
Over Wiegand 26/34 or the relay output to the barrier controller, or RS232 or RS485 to a PC.
Which tags does it read?
ISO 18000-6C (EPC Gen2) UHF tags, such as the MORX windshield tags.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.