At a glance
- Power Supply
- 12 V, 2 A
- Reading distance
- 0~18 m
- Dimensions
- 260 x 260 x 70 mm
- Antenna
- 9 dBi circular, built-in
Model RFG-CR20MORX RFG-CR20 UHF RFID Long-Range Reader
₹27,462 Incl. GST
₹23,273 + 18% GST
At a glance
- Power Supply
- 12 V, 2 A
- Reading distance
- 0~18 m
- Dimensions
- 260 x 260 x 70 mm
- Antenna
- 9 dBi circular, built-in
Long-range UHF RFID reader for toll, weighbridge and yard gates that identifies tagged vehicles well before the barrier. Built-in 9 dBi circular antenna, adjustable 0 to 33 dBm power, reads over 200 tags at once, with RS232, Wiegand, trigger and relay.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX RFG-CR20 is the long-range reader in the MORX CR series of fixed UHF (ultra high frequency) RFID (radio frequency identification) readers. A 9 dBi circularly polarised antenna and up to 33 dBm of RF power give it the reach for wide gates and vehicles that do not stop, identifying tagged vehicles well before the barrier. It suits toll and checkpoint lanes, weighbridges, logistics hubs, large parking entrances and industrial yard gates.
Is it right for you?
- It suits wide or fast lanes where the smaller CR readers would identify the vehicle too late.
- It suits outdoor pole mounting: rated -20 to 70 °C, with a 2.4 kg housing that needs a rigid pole.
- It draws under 12 W, more than the smaller CR models, so size the supply accordingly.
- For a single lane where the vehicle slows at the barrier, the RFG-CR06 or RFG-CR15 is enough.
Key features
- Reads ISO 18000-6B and ISO 18000-6C (EPC Gen2) tags, with more than 200 tags in group reading.
- 9 dBi circularly polarised antenna built in, so tag orientation matters less.
- RF power 0 to 33 dBm, adjustable, so the read zone can be tuned to the lane.
- Active, response and passive working modes, with a buzzer or LED read prompt.
- 865 to 867 MHz as standard; other bands can be customised.
- RS232, RS485 and Wiegand 26/34 as standard, with a trigger input and relay output; RJ45, Wi-Fi and GPRS mobile data as options.
- Software development kit (SDK) with DLL and demo source code.
- 260 x 260 x 70 mm, 2.4 kg.
What else you need
- A 12 V, 2 A power supply.
- A barrier controller, access panel or PC that accepts Wiegand, serial or relay signals.
- Matching UHF windshield tags for each vehicle, and a desktop reader such as the RFG-WD01 to enrol them.
- A rigid pole for the 2.4 kg housing.
Installation
A barrier or access control installer should mount it on a rigid pole facing the approaching windshields, wire the output to the controller and connect the 12 V supply. Tune the RF power so vehicles in neighbouring lanes are not read.
Before you buy
- Read range depends on the tag, the windshield and the surroundings; ask us for the figure that applies to your tags.
- Ask us to confirm the ingress rating if it is critical for your installation.
- State any optional interface or non-standard band on the order.
Technical specifications
Key facts
- What is it?
- Long-Range Vehicle AccessBrand MORX
- How is it powered?
- 12 V, 2 A
- Does it support Wiegand?
- Yes
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- outdoor rating, box contents
RelatedDocumentsAll MORX documents
General
- Model / configuration
- RFG-CR20
- Features and configuration
- 20 Mtr Integrated RFID Reader - Reading distance: 0~18 m (depending on tag) - 9 dBi circularly polarized antenna - Modbus - IP68 - Communication: RS232, Wiegand and Trigger and Relay
- Reading distance
- 0~18 m (depending on tag)
- Communication
- RS232, Wiegand and Trigger and Relay
- Protocol
- ISO 18000-6B, ISO 18000-6C (EPC Gen2)
- Frequency
- 865 to 867 MHz (other bands customised)
- Antenna
- 9 dBi circular, built-in
- RF Power
- 0 to 33 dBm, adjustable
- Multi-Tag Reading
- More than 200 tags
- Working Mode
- Active, response, passive
- SDK
- DLL and demo source code
Input
- Power Supply
- 12 V, 2 A
- Power Consumption
- Under 12 W
Environment
- Operating Temperature
- -20 to 70 °C
Physical
- Dimensions
- 260 x 260 x 70 mm
- Weight
- 2.4 kg net
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Connectivity | Wiegand |
Questions about this product
Can it be used outdoors?
Yes. It is rated -20 to 70 °C and made for pole mounting. Ask us to confirm the ingress rating if it matters for your installation.
What power does it need?
12 V, 2 A, using under 12 W.
Which tags does it read?
ISO 18000-6B and ISO 18000-6C (EPC Gen2) UHF tags, such as the MORX windshield tags.
How does it connect to the barrier?
Wiegand 26/34, RS232, RS485 or the relay output; RJ45, Wi-Fi and GPRS are options.
Can I integrate it with my own software?
Yes. An SDK with DLL and demo source code is provided.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.