At a glance
- Power Supply
- 10 to 30 V DC
- Dimensions
- 276 x 276 x 41 mm
- Protocol
- ISO/IEC 18000-6C (EPC C1 Gen2)
- Frequency
- 865 to 867 MHz
Model RFG-HR18MORX RFG-HR18 UHF RFID Project Reader
₹27,034 Incl. GST
₹22,910 + 18% GST
At a glance
- Power Supply
- 10 to 30 V DC
- Dimensions
- 276 x 276 x 41 mm
- Protocol
- ISO/IEC 18000-6C (EPC C1 Gen2)
- Frequency
- 865 to 867 MHz
UHF RFID reader for vehicle access and tracking projects, reading tags at up to 15 m. Impinj reader chip, built-in 9 dBi circular antenna, adjustable 0 to 33 dBm power, IP65, with Ethernet, RS232, Wiegand and a relay output.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX RFG-HR18 is a UHF (ultra high frequency) RFID (radio frequency identification) reader for project installations, reading tags at up to 15 m depending on the tag and surroundings. It pairs an Impinj E310 (or QM100) reader chip with a 9 dBi circular antenna in an IP65 aluminium and ABS housing. It suits warehouse and cargo tracking, vehicle inspection and customs points, anti-forgery checks, production line parts flow, e-ticketing and asset access management.
Is it right for you?
- It suits an integrator building a vehicle access or tracking system around their own software: SDKs are provided for Windows, Android and Linux.
- It suits outdoor mounting: IP65 and rated -20 to 70 °C.
- It works in the 865 to 867 MHz band, so check that this band is permitted where you install it.
- For a plain barrier lane with a relay or Wiegand link and no software, the RFG-CR series is simpler.
Key features
- Reads ISO/IEC 18000-6C (EPC C1 Gen2) tags at 865 to 867 MHz.
- Read distance 0 to 15 m depending on tag and surroundings, with multi-tag inventory.
- RF power 0 to 33 dBm, adjustable.
- RJ45 network, RS232 and Wiegand 26/34/66, with one optocoupler input and one relay output.
- Buzzer prompt, signal strength (RSSI) and tag filtering, custom output format and online firmware upgrade.
- Under 6 W while reading and under 2 W on standby.
- 276 x 276 x 41 mm, 1.6 kg.
What else you need
- A 10 to 30 V DC power supply.
- A controller, PC or programmable logic controller (PLC) that accepts Ethernet, serial or Wiegand data.
- Matching UHF tags, and a desktop reader such as the RFG-WD01 to enrol them.
- A sturdy pole bracket for the 1.6 kg housing.
Installation
A systems installer should mount it on a sturdy bracket facing the tags, run the network or serial cable and the DC supply, and set the output power and filtering in the software.
Software and licences
Software development kits (SDK) are provided for Windows (.NET, Java), Android and Linux (Java).
Before you buy
- It operates at 865 to 867 MHz (the UHF RFID band used in India); check that the band is permitted where you install it.
- Budget a sturdy pole bracket for 276 x 276 x 41 mm and 1.6 kg.
Technical specifications
Key facts
- What is it?
- Long-Range Vehicle AccessBrand MORX
- How is it powered?
- 10 to 30 V DC
- Does it support Wiegand?
- Yes26, 34, 66-bit
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- outdoor rating, box contents
RelatedSolutionParking and vehicle entranceDocumentsAll MORX documents
General
- Model / configuration
- RFG-HR18
- Features and configuration
- Integrated RFID Reader for RFID Projects - Up to 15 m read range - Built-in 9dBi antenna - Multiple interfaces (Ethernet, RS232, Wiegand) - IP65 rugged design
- Protocol
- ISO/IEC 18000-6C (EPC C1 Gen2)
- Frequency
- 865 to 867 MHz
- Chipset
- Impinj E310 / QM100
- Antenna
- 9 dBi circular, built-in
- RF Output Power
- 0 to 33 dBm, adjustable
- Interfaces
- RJ45, RS232, Wiegand 26/34/66
- General Purpose I/O
- 1 optocoupler input, 1 relay output
- SDK
- Windows .NET, Java; Android Java; Linux Java
Input
- Power Supply
- 10 to 30 V DC
- Power Consumption
- Under 6 W reading, under 2 W standby
Environment
- Operating Temperature
- -20 to 70 °C
Physical
- Dimensions
- 276 x 276 x 41 mm
- Weight
- 1.6 kg
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Connectivity | Wiegand |
Questions about this product
How far does it read?
Up to 15 m, depending on the tag and surroundings.
Can it be used outdoors?
Yes. It is IP65 and rated -20 to 70 °C.
What power does it need?
10 to 30 V DC, drawing under 6 W while reading and under 2 W on standby.
How does it connect?
RJ45 Ethernet, RS232 or Wiegand 26/34/66, plus one optocoupler input and one relay output.
Can I write my own software for it?
Yes. SDKs are provided for Windows, Android and Linux.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.