At a glance
- Read range
- 8~10 m when attached inside of vehicle’s windshield
- Chip
- Impinj RAIN RFID
- Write Range
- Up to 6 m
- Write Endurance
- 100,000 cycles
MORX RFG Tamper-Proof UHF RFID Windshield Tag
₹60 Incl. GST
₹50.85 + 18% GST
At a glance
- Read range
- 8~10 m when attached inside of vehicle’s windshield
- Chip
- Impinj RAIN RFID
- Write Range
- Up to 6 m
- Write Endurance
- 100,000 cycles
Windshield UHF RFID tag that breaks if someone peels it off, so it cannot be moved to another vehicle, for fleets and gated parking. Reads at 8 to 10 m inside a windshield, Impinj chip, 3M 467 MP adhesive, 100 x 50 mm, 1,000 per roll.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX RFG Tamper-Proof tag is a passive UHF (ultra high frequency) RFID (radio frequency identification) windshield tag with a fragile antenna: if someone peels it off to move it to another vehicle, the antenna breaks and the tag stops working, so each tag stays with the vehicle it was issued to. It reads at 8 to 10 m when fixed inside a windshield. It suits residential society and campus vehicle access, corporate and factory parking, fleet tracking and toll-style lanes where tag sharing must be prevented.
Is it right for you?
- It suits a gate where tags must not be shared between vehicles.
- It suits an EPC Gen2 long-range reader and a barrier controller.
- If tamper protection is not needed, the MORX ALN9654 paper tag is the plainer option.
- Rolls hold 1,000 tags.
Key features
- Impinj RAIN RFID chip on ISO/IEC 18000-6C (EPC Class 1 Gen2), for EU 865 to 868 MHz and US 902 to 928 MHz.
- Read range 8 to 10 m inside a windshield, and up to 15 m when tested with a 12 dBi reader; write range up to 6 m.
- 128-bit EPC, 512-bit user memory and 96-bit TID; user data can be password protected.
- Fragile self-destroying antenna, so the tag cannot be moved intact.
- Three layers of bright white PET with high-bond 3M 467 MP adhesive; waterproof, UV and chemical resistant.
- 100 x 50 mm tag with a 93 x 19 mm etched aluminium antenna; tag ID pre-printed on the adhesive side.
- 100,000 write cycles, 10 years of data retention, rated -25 to 80 °C.
What else you need
- An EPC Gen2 long-range reader on 865 to 868 MHz or 902 to 928 MHz and a barrier controller.
- A desktop UHF reader such as the MORX RFG-WD01 to enrol tag IDs.
Installation
Clean the inside of the windshield, press the tag on and enrol its ID in the access software. Once fixed it cannot be removed and reused, so place it carefully the first time.
Before you buy
- Real-world range depends on the windshield and the reader; plan on 8 to 10 m inside a windshield.
- Tags can be custom printed so the design shows through the glass.
- Supplied on rolls of 1,000.
Technical specifications
Key facts
- What is it?
- Long-Range Vehicle AccessBrand MORX
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- power, wiegand, outdoor rating, box contents
RelatedSolutionParking and vehicle entranceDocumentsAll MORX documents
- Model / configuration
- RFG - TAMPER PROOF TAGS
- Features and configuration
- - UHF RFID Windshield Laminated Tag - Read range: 8~10 m when attached inside of vehicle’s windshield
- Read range
- 8~10 m when attached inside of vehicle’s windshield
- Protocol
- ISO/IEC 18000-6C (EPC Class 1 Gen2)
- Chip
- Impinj RAIN RFID
- Frequency
- EU 865 to 868 MHz, US 902 to 928 MHz
- Write Range
- Up to 6 m
- Memory
- 128-bit EPC, 512-bit user, 96-bit TID
- Write Endurance
- 100,000 cycles
- Data Retention
- 10 years
- Tamper Proof
- Yes, fragile self-destroying antenna
- Material
- Bright white thick PET, etched aluminium antenna
- Adhesive
- 3M 467 MP
- Tag Size
- 100 x 50 mm
- Antenna Size
- 93 x 19 mm
- Operating Temperature
- -25 to 80 °C
- Packaging
- 1,000 per roll
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|
Questions about this product
What happens if someone peels it off?
The fragile antenna breaks and the tag stops working, so it cannot be moved to another vehicle.
How far can it be read?
8 to 10 m inside a windshield; up to 15 m when tested with a 12 dBi reader.
Which readers does it work with?
EPC Gen2 (ISO/IEC 18000-6C) UHF readers on 865 to 868 MHz or 902 to 928 MHz, such as the MORX RFG long-range readers.
Is it weatherproof?
Yes. It is waterproof, UV and chemical resistant and rated -25 to 80 °C.
Can it be printed with our design?
Yes. Custom printing is available so the design shows through the glass.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.