At a glance
- Read Range
- Up to 12 m
- Dimensions
- 100 x 25 mm, about 400 microns thick
- Ingress Protection
- IP65
- Chip
- Alien Higgs
MORX ALN9654 UHF RFID Windshield Paper Tag with 3M Adhesive
₹27 Incl. GST
₹22.88 + 18% GST
At a glance
- Read Range
- Up to 12 m
- Dimensions
- 100 x 25 mm, about 400 microns thick
- Ingress Protection
- IP65
- Chip
- Alien Higgs
Paper UHF RFID tag that sticks inside a vehicle windshield so a long-range reader can open the gate as the car approaches, for housing societies, offices and car parks. Alien Higgs chip, 3M 467 MP adhesive, reads up to 12 m.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX ALN9654 is a passive UHF (ultra high frequency) RFID (radio frequency identification) windshield tag that sticks inside a vehicle’s windshield so a long-range reader can open the gate as the car approaches. It is printed on thick glossy PET with 3M 467 MP adhesive on the back and reads from up to 12 m. It suits automatic vehicle entry at housing societies, office and mall car parks, hotels, factories, toll points and parking lots.
Is it right for you?
- It suits any gate with an EPC Gen2 long-range reader, such as the MORX RFG-CR32, and a boom barrier.
- It suits a project that wants custom printing: logos, numbers, barcodes or QR codes can be added.
- If tags must not be moved from one vehicle to another, the MORX RFG Tamper-Proof tag breaks when peeled off.
- Rolls hold 2,500 tags, so it suits larger fleets and residential communities.
Key features
- Read range up to 12 m and write range up to 5 m, depending on reader and surroundings.
- ISO/IEC 18000-6C (EPC Class 1 Gen2), on EU 865 to 868 MHz and US 902 to 928 MHz.
- Alien Higgs chip with 96-bit EPC, 32-bit TID and 512-bit user memory.
- Tamper-evident from all sides, waterproof and chemical resistant, IP65.
- 200,000 write cycles and 10 years of data retention.
- 100 x 25 mm, about 400 microns thick, 1.6 g, with an etched aluminium antenna; rated -25 to 80 °C.
What else you need
- A UHF long-range reader on the EPC Gen2 standard and a barrier or access controller.
- A desktop UHF reader such as the MORX RFG-WD01 to enrol tag numbers into the software.
Installation
Clean the inside of the windshield, peel the tag and press it on, then enrol its number in the access software. Test on the vehicles you serve: metallised or heat-reflective windshields reduce the read range.
Before you buy
- Supplied on rolls of 2,500; roll size can be customised.
- Custom printing is available for a project, so tell us what you need on the tag.
- Metallised or heat-reflective glass shortens the read range.
Technical specifications
Key facts
- What is it?
- Long-Range Vehicle AccessBrand MORX
- Can it be used outdoors?
- IP65
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- power, wiegand, box contents
RelatedSolutionParking and vehicle entranceDocumentsAll MORX documents
General
- Model / configuration
- Windshield ALN9654 Paper Tags with 3M
- Features and configuration
- - UHF RFID Windshield Paper Tag
- Protocol
- ISO/IEC 18000-6C (EPC Class 1 Gen2)
- Frequency
- EU 865 to 868 MHz, US 902 to 928 MHz
- Chip
- Alien Higgs
- Read Range
- Up to 12 m
- Write Range
- Up to 5 m
- Memory
- 96-bit EPC, 32-bit TID, 512-bit user
- Write Endurance
- 200,000 cycles
- Data Retention
- 10 years
- Adhesive
- 3M 467 MP
Environment
- Ingress Protection
- IP65
- Operating Temperature
- -25 to 80 °C
Physical
- Material
- Thick glossy PET, etched aluminium antenna
- Dimensions
- 100 x 25 mm, about 400 microns thick
- Weight
- 1.6 g
- Packaging
- 2,500 per roll (customisable)
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| IP Rating | IP65 |
Questions about this product
How far can it be read?
Up to 12 m, depending on the reader and the windshield. Coated glass shortens it.
Which readers does it work with?
Any EPC Gen2 (ISO/IEC 18000-6C) UHF reader on 865 to 868 MHz or 902 to 928 MHz, such as the MORX RFG long-range readers.
Can it be moved to another car?
It is tamper-evident from all sides. For a tag that breaks when peeled off, choose the MORX RFG Tamper-Proof tag.
Is it weatherproof?
Yes. It is waterproof, chemical resistant, rated IP65 and -25 to 80 °C.
How many come in a roll?
2,500 as standard, and the roll size can be customised.
Can it be printed with our logo?
Yes. Logos, numbers, barcodes or QR codes can be custom printed.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.