At a glance
- Contact Output
- NO / COM
- Panel Material
- Aluminium
Model MS-3MORX MS-3 Aluminium Exit Button (NO/COM)
₹698 Incl. GST
₹592 + 18% GST
At a glance
- Contact Output
- NO / COM
- Panel Material
- Aluminium
Aluminium push button fitted inside an access-controlled door so people can leave without a card or PIN, for offices, shops and building entrances. Normally open (NO) and common (COM) contacts signal the controller or release the lock.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX MS-3 is an aluminium exit button with a single normally open (NO) contact and a common (COM) terminal. Pressing it closes the contact, which tells an access controller to open the door or triggers a lock release circuit, so people inside can leave without a card or PIN. A metal faceplate suits offices, shops and building entrances.
Is it right for you?
- Suits a controller or standalone reader with an exit input, which is the usual way an NO contact is used.
- Not for wiring directly in series with a fail-safe lock supply, since it has no NC contact; use a controller or relay for that, or choose the MORX MS-1 with NO, NC and COM contacts.
- Suits places that want a metal plate but not stainless steel.
Key features
- Aluminium faceplate.
- NO and COM contact pair, the format used on the exit or request-to-exit input of typical access controllers.
- Part of the MORX exit button range alongside the stainless steel MS-1 and MS-2.
What else you need
- An access controller or standalone reader with an exit input.
- A two-core cable from the button to the controller.
Installation
An access control installer or electrician should fit it. Dimensions, contact rating and mounting method are not stated by the manufacturer, so check the button on receipt before cutting a wall or frame opening, and confirm the contact rating against the circuit it will switch.
Before you buy
- NO and COM only: no NC contact.
- Dimensions, contact rating and mounting method are not stated by the manufacturer; check the unit before planning the opening and the load.
Technical specifications
Key facts
- What is it?
- Exit buttonBrand MORX, model MS-3
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
RelatedGuideAccess control door setup checklistDocumentsAll MORX documents
- Panel Material
- Aluminium
- Contact Output
- NO / COM
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Button Type | Push |
Works with this product
Relevant accessories
- MORX 600 lbs EM Lock with Timer and FeedbackEL-600
Why Exit button for a MORX 600 lbs EM lock door. Condition: Connect to a controller exit input; NO/COM only.
₹2,267Add to cart
Replacements and alternatives
- MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)MS-1
Why MORX exit button with NO/NC/COM contacts and published ratings. Condition: Choose MS-1 if an NC contact is needed.
₹368Add to cart
Questions about this product
Can it cut the power to an EM lock directly?
No. It has only an NO contact, so it signals a controller or relay rather than breaking a fail-safe lock supply. The MORX MS-1 has an NC contact for that.
Does it need power?
No. It is a switch with no electronics.
What are its dimensions and rating?
Not stated by the manufacturer. Check the unit on receipt before cutting an opening.
Ask about this modelDoor fit, access methods, installation
Answers are automated. Do not enter personal or account details.