Nice FLO2RE 2-channel remote control, 433.92 MHz Flo-R rolling code

Overview

The Nice FLO2RE is a two-button remote control for opening and closing gates, garage doors and barriers driven by Nice control units or receivers that use Flo-R coding. It is part of the Era Flor range and transmits at 433.92 MHz with a rolling code that changes on every press, which resists code grabbing. With two buttons it can run two automations, for example the gate and the garage door.

Is it right for you?

• Suits a Nice receiver or control unit that supports Flo-R coding; check the receiver’s documentation.
• Two buttons are enough for one or two automations; the FLO4RE has four.
• For a new installation, newer Nice remotes such as the INTI2 use 72 bit O-Code and also work with Flo-R receivers.

Key features

• 2 buttons with Flo-R 52 bit rolling code at 433.92 MHz.
• Estimated range of 200 m outdoors and 35 m inside buildings.
• CR2032 3 V lithium battery lasting about 2 years at 10 presses a day.
• The LED dims or lights slowly when the battery is low, so you know to change it.
• About 1 mW ERP radiated power.
• IP40, for household or protected environments, and -20 to +55 °C.
• 45 x 56 x 11 mm and 18 g.

What else you need

A Nice receiver or control unit that supports Flo-R coding. A keyring cord and a wall-mounting support are optional accessories.

Installation

No fitting. The remote is memorised in the receiver either with all buttons at once (Mode I) or one button at a time (Mode II), following the receiver’s manual; a gate installer can do this during a service visit.

Before you buy

• Range can drop where other devices use the same frequency.
• The receiver must support Flo-R coding.