Online checkout is currently closed. Browse products, build your list and request a quotation. Need help? Call or WhatsApp us.Online checkout is currently closed. Call or WhatsApp for enquiries.

  • Sold by Sada Smart Solutions LLP, GSTIN 29AEJFS5796N1ZTSada Smart Solutions LLP

Call or WhatsApp +91 96060 62750 / 62751, Mon to Sat, 9:00 AM to 6:30 PM

Nice Gate automation kits

Gearmotor kits for sliding and swing gates, with remotes, receivers, photocells and flashing lights. Choose the motor by gate weight and leaf length.

Shop Nice productsRequest a quotation
  • Priced online
  • Some models on quotation
About the Nice range
Nice Robus 600 gearmotor installed beside a sliding gate
  1. Robus 600: 700 N thrust, 0.34 m/s

All Nice products

35 products

GridListTable

Nice gate automation at SecurityGearHub

Choosing a Nice kit comes down to the gate itself. Note whether it slides or swings, measure the leaf width and estimate its weight, then compare those numbers with the limits stated on each kit page. A heavier or longer gate needs a larger kit, and a gate that opens many times a day calls for a model rated for frequent use. Several kits, including the RB1000, RBS600, RO600KCE and RD400, are offered with or without a flashing light, so decide whether you want a visible warning when the gate moves. Plan extra remotes for every household member or driver, and add a pair of photocells so the gate stops if a person or vehicle is in its path.

The Nice range

What Nice covers

Diagram of a sliding gate with gearmotor, rack, photocells across the opening and a flashing light on the pillar
Illustrative, not to scale.

Safety

What goes on a sliding gate

A sliding gate installation has four main parts. Photocells and a flashing light are wired to the control unit in the gearmotor and set up during commissioning.

  1. 1 GearmotorSits on a base plate beside the opening and drives the leaf through the rack. Robus 600: 700 N, 0.34 m/s, IP44.
  2. 2 RackFixed along the bottom of the leaf. 22 x 22 mm and 12 x 22 mm racks, module 4.
  3. 3 PhotocellsA beam across the opening. When it is broken the control unit acts as programmed, for example stopping and reversing a closing gate. EPM: up to 15 m; EPMB runs on the two-wire BlueBUS and detects opaque objects over 50 mm.
  4. 4 Flashing lightELAC: white LED with built-in flasher, 90 to 240 V AC, with an integrated 433.92 MHz antenna.

Control

Photocells, remotes and Wi-Fi control

Safety and control accessories that connect to the kit’s control unit.

  1. Nice EPM photocell pairEPMPhotocell pair, 15 m range, 30 m with the jumper cut, IP44.
  2. Nice ELAC flashing lightELACFlashing light with integrated antenna, IP44.
  3. Nice MYGO2BD two channel remoteMYGO2BDTwo channel remote, 433.92 MHz, CR2430 battery.
  4. Nice BiDi-WiFi interface moduleBiDi-WiFiWi-Fi interface for compatible Nice control units, 2.4 GHz, 12 to 24 V.
Key-operated manual release on a Nice swing gate arm
Manual release on a Nice swing gate arm

Swing gates

Arm and underground motors for swing leaves

Arm kits cover leaves of different lengths, in 24 V and 230 V versions. Underground kits such as MFAB3000 and LFAB4000 sit below the hinge, out of sight. The arm shown has a key-operated release for opening the leaf by hand.

Solutions with Nice

Where these products are used

All solutions

Resources

Nice documents and software

All Nice documents

Software and apps

Documents by type

Not sure which Nice model fits?

Tell us what it is for and we suggest models. For a larger order, send models and quantities for a quotation (needs an account).

Ask for helpRequest a quotationCall +91 96060 62750