Nice FLO4RE 4-channel remote control, 433.92 MHz Flo-R rolling code

Overview

The Nice FLO4RE is a four-button remote control for opening and closing gates, garage doors and barriers driven by Nice control units or receivers that use Flo-R coding. It is part of the Era Flor range and transmits at 433.92 MHz with a rolling code that changes on every press, which resists code grabbing. With four buttons it can run up to four commands or automations, such as the gate, a pedestrian opening and the garage door.

Is it right for you?

• Suits a Nice receiver or control unit that supports Flo-R coding; check the receiver’s documentation.
• Four buttons suit a place with several automations or commands; the FLO2RE has two.
• For a new installation, newer Nice remotes such as the INTI2 use 72 bit O-Code and also work with Flo-R receivers.

Key features

• 4 buttons with Flo-R 52 bit rolling code at 433.92 MHz.
• Estimated range of 200 m outdoors and 35 m inside buildings.
• CR2032 3 V lithium battery lasting about 2 years at 10 presses a day.
• The LED dims or lights slowly when the battery is low, so you know to change it.
• About 1 mW ERP radiated power.
• IP40, for household or protected environments, and -20 to +55 °C.
• 45 x 56 x 11 mm and 18 g.

What else you need

A Nice receiver or control unit that supports Flo-R coding. A keyring cord and a wall-mounting support are optional accessories.

Installation

No fitting. The remote is memorised in the receiver either with all buttons at once (Mode I) or one button at a time (Mode II), following the receiver’s manual; a gate installer can do this during a service visit.

Before you buy

• Range can drop where other devices use the same frequency.
• The receiver must support Flo-R coding.