Nice INTI2 2-channel mini remote control, 433.92 MHz O-Code

Overview

The Nice INTI2 is a small black two-button remote control from the Era Inti range for Nice gates, garage doors and similar automations. It transmits at 433.92 MHz with 72 bit O-Code rolling code and also works with receivers that use Nice Flo-R coding, so it can replace or add to the remotes on most Nice systems. Its two channels can run two automations, for example the gate and the garage door.

Is it right for you?

• Suits a Nice receiver or control unit with O-Code coding, and also Flo-R receivers (the NiceOpera functions such as remote enabling are then not available).
• Smaller and lighter than the Era Flor and Era One remotes, which suits a key ring.
• Two channels; for more automations look at the MYGO4.

Key features

• 2 channels at 433.92 MHz with 72 bit O-Code rolling code.
• Compatible with Flo-R receivers as well as O-Code receivers.
• CR2032 3 V lithium battery lasting about 2 years at 10 transmissions a day.
• The LED takes longer to light or dims when the battery needs replacing.
• IP40 for protected environments, -20 to +55 °C.
• Compact body of 30 x 56 x 9 mm in black.

What else you need

A Nice receiver or control unit that supports O-Code or Flo-R coding. A keyring cord is an optional accessory.

Installation

No fitting. The remote is memorised in the receiver with all buttons at once (Mode I) or one button at a time (Mode II), following the receiver’s manual; on O-Code receivers it can also be enabled from an already memorised remote.

Before you buy

• Transmitter range and receiver reception can be affected by other devices in the area operating on the same frequency and by the position of the system’s radio antenna.