Nice MYGO4 4-channel remote control, 433.92 MHz O-Code

Overview

The Nice MYGO4 is a four-button remote control from the MyGo range, so one handset can run several Nice gates, garage doors or other automations. It transmits at 433.92 MHz with O-Code encoding for Nice O-Code receivers, and the installer can programme it with the MyNice Pro app and the Pro-View interface. It suits a home or building with more than one automation, or a gate with extra commands such as a pedestrian opening.

Is it right for you?

• Suits Nice receivers and control units with O-Code encoding.
• Four buttons cover up to four automations or commands; the MYGO2 has two and the MYGO8 has eight.
• If you want confirmation that the gate closed, the bidirectional MYGO2BD or MYGO4BD give status feedback with a BiDi receiver.

Key features

• 4 channels at 433.92 MHz with O-Code encoding.
• Estimated range of 200 m outdoors and 35 m inside a building.
• CR2430 3 V lithium battery lasting about 3 years at 10 transmissions a day, with the info LED flashing red when the battery is low.
• Programmed with the MyNice Pro app and Pro-View interface; the installer can enable an additional remote remotely, or from a MyGo remote already enabled in the receiver.
• IP30, 72 x 34 x 11 mm and 20 g.

What else you need

A Nice receiver or control unit with O-Code encoding.

Installation

No fitting. The installer programmes it with the MyNice Pro app and the Pro-View interface, or it is enabled from a MyGo remote already enabled in the receiver or memorised following the receiver’s manual.

Before you buy

• Transmitter range and receiver reception can be affected by other devices in the area on the same frequency and by the position of the system’s radio antenna.