UGREEN 10 m High Speed HDMI with Ethernet Cable, 4K UHD (10110)

Overview

The UGREEN 10110 is a 10 m High Speed HDMI with Ethernet cable for a TV or projector across a room from a player, PC or set-top box. It is a passive full copper cable that carries 4K UHD and 1080p with digital audio, and passes 3D, audio return (ARC), CEC and HDMI Ethernet Channel when both devices support them.

Is it right for you?

• Suits a ceiling projector, a wall-mounted TV far from the equipment, or a meeting room screen fed from a laptop point at the table.
• Long passive HDMI runs depend more on the source output strength, any devices in between and connector condition than short leads do. Test the run at the mode you need before fixing the cable in place.
• 4K UHD is supported within the limits of the connected equipment; no refresh rate ceiling is stated. If you need a particular 4K refresh rate over 10 m, confirm it with your own equipment first.
• It is a straight HDMI to HDMI lead. It does not convert USB-C, DisplayPort, DVI or VGA, and it does not split one source to several screens.

Key features

• 10 m long with two full-size HDMI Type-A male plugs.
• 4K UHD within connected-equipment limits, with 1080p and other shared modes.
• Digital HDMI video with the source’s digital audio.
• Passes 3D, audio return channel (ARC), CEC remote control and HDMI Ethernet Channel when both ends support the feature.
• Full copper conductors, gold-plated connectors, a shielded black round cable and moulded Type-A connector housings.
• Passive: no booster, driver or external power needed.
• Supports mirror or extended-desktop use when a computer is the source.

What else you need

A source and a display, receiver or switch with full-size HDMI ports. Any coupler, wall plate, switch or receiver in the path adds another HDMI handshake and a point of signal loss, so keep the route as direct as you can.

Installation

Test the cable before routing it permanently, because an installed 10 m run is hard to replace. If the picture sparkles, blanks or loses sync, test the cable directly at 1080p first, then raise the output mode step by step before assuming the display is at fault.

Before you buy

• No in-wall, plenum, LSZH, outdoor or fire-resistance rating is published for this cable.
• It does not amplify or repeat the signal, upscale low-resolution content or raise a game’s frame rate.
• It does not guarantee that a receiver, switch, coupler or wall plate in the path will pass the maximum mode.
• Optional functions such as ARC, CEC, 3D and Ethernet Channel need support at both ends.