UGREEN 40202 1×4 HDMI 1.4 Splitter, 4K30

Overview

The UGREEN 40202 is a powered HDMI splitter that shows one source on four screens at the same time. One player, PC or recorder plugs into the input, and four TVs or displays receive the same picture and sound from the outputs. It suits a shop, waiting room, classroom or gym where one programme plays on several screens.

Is it right for you?

• Suits mirroring one source to four displays. It cannot extend a desktop or show different content on each screen.
• Up to 4K x 2K at 30 Hz; for 4K at 60 Hz, choose a splitter rated for 4K at 60 Hz.
• One source only; it is not a four-input switch.

Key features

• One HDMI input and four HDMI outputs showing the same programme.
• HDMI 1.4 with up to 4K x 2K at 30 Hz, 1080p at 24, 50 and 60 Hz, and 1920 x 1200.
• Deep colour up to 12-bit.
• Passes DTS, DTS-HD, Dolby and Dolby TrueHD audio without decoding it.
• Automatic signal distribution with no controls to set.
• Runs from a 12 V DC adapter, which is in the box; operating temperature 0 to 48 °C; 440 g.

What else you need

An HDMI cable from the source and one for each display, and a mains socket for the 12 V adapter.

Installation

No installation is needed. Connect the source, the displays and the adapter. Start with short cables and add outputs only once every path is stable. Indoor use only; keep it dry, ventilated and away from direct heat.

Before you buy

• Mixed displays can force a lower common mode or a blank screen; there is no per-output scaling or independent EDID (Extended Display Identification Data).
• Protected content needs HDCP (High-bandwidth Digital Content Protection) support end to end; the splitter cannot bypass it.
• No cable-length table is published, so test long runs before fixing them in place.
• It requires its 12 V supply to run.