UGREEN 50708EU 1×4 HDMI 2.0 Splitter, 4K60, Powered

Overview

The UGREEN 50708EU is a powered HDMI 2.0 splitter that shows one source on four screens at the same time, at up to 4K at 60 Hz with HDR. One player, PC or recorder plugs into the input and four TVs or displays receive the same picture and sound. It suits a shop, bar, waiting area or training room where one programme plays on several screens.

Is it right for you?

• Suits mirroring one source to four displays at up to 4K. It cannot extend a desktop or show different content on each screen.
• One source only; it is not a four-input switch.
• All four outputs carry the same negotiated signal, so the displays should share a common resolution.

Key features

• One HDMI input and four HDMI outputs.
• HDMI 2.0 with up to 3840 x 2160 at 60 Hz.
• HDR and 3D pass-through with HDCP (High-bandwidth Digital Content Protection) 2.2.
• Passes LPCM 7.1, DTS, DTS-HD, Dolby AC-3 and Dolby TrueHD audio; the connected equipment does the decoding.
• 5 V DC 1 A power adapter in the box.
• Cable guidance: up to 15 m on the input and 15 m on an output for supported modes; for 4K at 60 Hz plan about 5 m each side with suitable 22, 24 or 26 AWG cable.
• 22.5 x 14.5 x 5.2 cm, 527 g.

What else you need

An HDMI cable from the source and one for each display; HDMI cables are not listed in the box. A mains socket for the adapter.

Installation

No installation is needed. Connect the source, the displays and the adapter, which must stay connected. Indoor use only; keep it dry, ventilated and away from direct heat.

Before you buy

• Mixed displays can force a lower common mode or a blank screen; the four outputs are not scaled independently.
• Protected content needs HDCP support end to end; the splitter cannot bypass it.
• Treat the cable lengths as maximums, not a guarantee; long-cable stability depends on the complete path.