UGREEN 5 m HDMI 1.4 Cable, 4K@30Hz (10167)

Overview

The UGREEN 10167 is a 5 m HDMI 1.4 cable for connecting a player, set-top box or PC to a TV or projector a few metres away. It carries 3840 x 2160 at 30 Hz, or 1080p, when the source and the display support those modes, with 3D, audio return (ARC), CEC and HDMI Ethernet Channel passing through where both devices support them. It is a passive cable with a 99.9% oxygen-free copper core and black and yellow moulded connector housings.

Is it right for you?

• It suits a route of up to 5 m for films, TV, presentations and everyday computer use at 1080p or 4K at 30 Hz.
• A 5 m passive run is more sensitive to the source output, any intermediate device and connector condition than a short direct lead, so test it before routing it permanently.
• Both devices must support the mode you want. The cable does not amplify or repeat the signal, and it does not upscale content or increase a game’s frame rate.
• Any coupler, wall plate, switch or receiver in the path adds another handshake and a point of signal loss, and must support the same mode.

Key features

• Up to 3840 x 2160 at 30 Hz on a fully compatible direct path; 1080p and other common modes where the devices need them.
• 3D, audio return channel (ARC), single-remote control (CEC) and HDMI Ethernet Channel pass through when both devices support them.
• Mirror or extended desktop use from a compatible computer.
• 99.9% oxygen-free copper core with multi-layer shielding, zinc alloy and PVC materials, and black and yellow moulded connector housings.
• Passive cable: no driver or external power.

What else you need

Only the two devices: a computer, media player, set-top box, Blu-ray player, console or AV receiver with a full-size HDMI output and a TV, large-format display, monitor or projector with a full-size HDMI input.

Installation

No installer is needed. Plug one end into the HDMI output of the source and the other into the HDMI input of the TV, monitor or projector, select the matching input on the display and set the resolution on the source. Test the cable before routing it permanently, because an installed run can be hard to replace.

Before you buy

• No in-wall, plenum, low-smoke (LSZH), outdoor or fire-resistance rating is published for this cable.
• It does not convert USB-C, DisplayPort, DVI or VGA, and it does not split one source across several displays.
• If the picture sparkles, blanks or loses sync, test at 1080p with a direct connection before raising the output mode or assuming the display is faulty.
• No conduit, pull sock, signal tester or adapter is included.