UGREEN 70320 1.5 m HDMI 2.1 Cable, 8K60/4K120, 48 Gbps

Overview

The UGREEN 70320 is a 1.5 m HDMI 2.1 cable for connecting a PS5, Xbox Series console, gaming PC or streaming box to a TV, monitor, AV receiver or soundbar close by. It carries up to 48 Gbps, enough for 8K at 60 Hz or 4K at 120 Hz when the source, the display and anything between them support those modes. It is a passive copper cable with full-size HDMI plugs at both ends, and either plug can face the source.

Is it right for you?

• It suits a console or PC sitting within 1.5 m of the screen or receiver; measure the route with a little slack and avoid a tight coil or tension.
• Both the HDMI output and the HDMI input must support the mode you want. The cable cannot add a resolution, refresh rate, eARC or an HDCP version to a port that lacks it.
• Every adapter, receiver, switch, splitter, wall plate or extra cable in the path must support the same video, HDCP and audio requirements.
• It joins two full-size HDMI ports only. It does not convert USB-C, DisplayPort, Mini HDMI, Micro HDMI, DVI or VGA, and it is not an active repeater, fibre extender or network cable.

Key features

• 48 Gbps HDMI 2.1 bandwidth, for up to 8K at 60 Hz or 4K at 120 Hz on supporting equipment.
• Passes Dynamic HDR signalling and Dolby Vision (high dynamic range) for brighter, higher-contrast pictures from compatible content.
• Enhanced audio return channel (eARC), so a TV can send full surround sound back to a soundbar or receiver that supports it.
• High-refresh video on compatible gaming equipment, within each console’s and game’s own limits.
• Works with earlier HDMI equipment at the lower mode the devices agree on.
• Tinned copper conductors with multiple shielding layers, aluminium foil, cotton yarn and PE insulation, under a nylon braid with zinc alloy connector shells.
• Passive copper construction: no external power is needed.

What else you need

Only the two devices: a source with a full-size HDMI output and a TV, monitor, projector, receiver or soundbar with a full-size HDMI input (an eARC-capable port if you want eARC). No power supply, driver or software is needed.

Installation

No installer is needed. Plug one end into the HDMI output of the console or PC and the other into the HDMI input of the screen or receiver; either plug can face the source. Select the matching input on the display and set the resolution and refresh rate on the source.

Before you buy

• The 8K at 60 Hz and 4K at 120 Hz figures are cable ceilings. The source, HDMI port, display, content, colour format, firmware and every intermediate device decide the actual mode.
• It does not upscale content, create HDR, decode audio, generate frames or improve the native quality of a display.
• No in-wall or concealed-route safety rating is stated for this cable, so do not rely on one.
• Check that the cable you receive is marked 70320 and 1.5 m.