UGREEN 80397 2 m Active DisplayPort-to-HDMI 2.1 Cable, 8K60

Overview

The UGREEN 80397 is a 2 m active cable with a full-size DisplayPort plug at one end and an HDMI plug at the other. It converts the DisplayPort output of a PC, graphics card, laptop or workstation into an HDMI 2.1 signal for a TV, monitor, projector or supported VR headset, at up to 8K at 60 Hz or 4K at 120 Hz. It works in one direction only, from DisplayPort to HDMI.

Is it right for you?

• Choose it when a PC with only DisplayPort outputs has to feed an HDMI TV or monitor at a high resolution or refresh rate.
• HDMI-only sources, such as a PlayStation, Xbox, Switch or a MacBook with HDMI output, cannot use it. It does not convert HDMI into DisplayPort.
• If you need VRR, ALLM, AMD FreeSync or NVIDIA G-SYNC on the HDMI display, this cable does not support them.

Key features

• Active DisplayPort 1.4 to HDMI 2.1 conversion, with a 32.4 Gbps DisplayPort 1.4 input link.
• Up to 8K at 60 Hz or 4K at 120 Hz on compatible source and display hardware.
• Dynamic high dynamic range (HDR) pass-through, HDCP 2.3 content protection and Display Stream Compression (DSC) 1.2a.
• Dolby 7.1 audio pass-through to the display or receiver.
• Mirror and extended desktop modes, chosen on the computer.
• 28 AWG tinned copper conductors with triple shielding, aluminium alloy housings and a nylon-braided jacket.

What else you need

A computer or graphics card from AMD, NVIDIA or Intel with a full-size DisplayPort output, and a display with an HDMI input. The computer must be able to output the mode you want through DisplayPort.

Before you buy

• One-way active cable: DisplayPort source to HDMI display only.
• VRR, ALLM, FreeSync and G-SYNC are explicitly not supported.
• Every screen in a multi-monitor setup needs its own graphics output and its own cable; one cable does not create several displays.
• Any device between the two ends must support the same video, audio and content-protection requirements.