UGREEN 30945 HDMI over Cat6 Extender Receiver, 1080p, up to 120 m with IR

Overview

The UGREEN 30945 (model MM116) is the receiving half of a UGREEN HDMI over network cable extender. It takes the signal that the matching UGREEN 40280 transmitter sends down a Cat5e or Cat6 cable and turns it back into HDMI for a TV, monitor or projector up to 120 m from the source, and it passes remote control (IR) signals as well. It does nothing on its own; buy it to pair with a 40280 transmitter.

Is it right for you?

• Suits a lobby screen fed from a server room, a classroom projector, a shop display or a CCTV monitor in a guard room.
• It only works with the UGREEN 40280 transmitter.
• The system is 1080p, so it is not suitable for 4K content.
• Network cable is cheaper and easier to route through walls than long HDMI leads.

Key features

• Transmission distance up to 120 m over suitable Cat6 cable; Cat5e also works.
• Video up to Full HD 1080p.
• IR (infrared) pass-through, so a set-top box or player can be controlled from the display end when used with the matching transmitter.
• Zinc alloy housing, about 110 x 65 x 20 mm, 300 g.
• Powered by a 5 V 1 A input.

What else you need

• The UGREEN 40280 transmitter at the source end.
• A Cat5e or Cat6 cable run in solid copper, terminated correctly.
• An HDMI cable from the receiver to the display.
• 5 V 1 A power. Ask our team which power adapter comes in the box.

Installation

An AV or CCTV installer, or a confident DIYer, can fit it. Distance depends on cable category, conductor quality and termination, so use solid copper cable and terminate it properly.

Before you buy

• This is a receiver only and does nothing without the 40280 transmitter.
• The system is limited to 1080p.
• The full 120 m depends on good Cat6 cable and clean terminations.