At a glance
- Simultaneous output
- Phone up to 25 W + earbuds 5 W,
- Weight
- 284g (Including box)
- Input connector
- USB-C
In the box
- UGREEN 55963 MagFlow 2-in-1 magnetic wireless charger
- USB-C to USB-C cable, about 1 m
- User manual
UGREEN MagFlow 55963 25 W Qi2 2-in-1 Charging Stand
₹8,579 Incl. GST MRP ₹8,886 3% below MRP
₹7,270 + 18% GST
At a glance
- Simultaneous output
- Phone up to 25 W + earbuds 5 W,
- Weight
- 284g (Including box)
- Input connector
- USB-C
Charges a magnetic phone and wireless earbuds together on one foldable stand, for a desk or bedside. Qi2 certified, up to 25 W to the phone and 5 W to earbuds at the same time, powered over USB-C.
- WarrantyManufacturer warranty under UGREEN's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The UGREEN MagFlow 55963 is a Qi2-certified 2-in-1 stand that charges a magnetic phone and a pair of wireless earbuds at the same time, then folds flat for travel. A compatible phone receives up to 25 W and the earbuds pad up to 5 W, with the phone held by 16 magnets at up to 7 N and adjustable through about 70° for portrait or landscape viewing. It is powered over USB-C and has no battery of its own; a 1 m cable is included but no wall adapter.
Is it right for you?
- Suits a desk or bedside where a phone and earbuds charge together without cables.
- The full 25 W phone rate needs an iPhone 16-series phone running iOS 26 or later, a 45 W or higher USB-C adapter and a suitable cable; other models, cases or software versions may charge at less.
- Not a power bank: it charges only while connected to a USB-C power source.
Key features
- Qi2 certified; phone up to 25 W and earbuds up to 5 W at the same time with a suitable power source.
- 16 magnets with up to 7 N holding force for alignment.
- Folds for travel and adjusts through about 70° for portrait or landscape use.
- ThermalGuard temperature control and eight-layer protection against abnormal current, voltage and heat.
- USB-C input at a 12 V/3 A operating point; grey.
What else you need
- A USB-C Power Delivery (PD) wall adapter of 45 W or higher for the full 25 W phone mode; a wall adapter is not included.
- The included 1 m USB-C to USB-C cable, or a replacement rated 60 W or higher.
Before you buy
- The 25 W figure applies under the stated conditions: iPhone 16-series, iOS 26 or later, 45 W or higher adapter and a suitable cable.
- The phone, case and charging surface may feel warm, and charging can slow or pause while the devices protect themselves. Disconnect if heat is excessive.
- The magnetic hold assumes a compatible, aligned phone and is not impact protection. Support the phone while adjusting the stand and do not hang it over fragile objects.
Technical specifications
Key facts
- What is it?
- Wireless chargerBrand UGREEN, model 55963
- What comes in the box?
- UGREEN 55963 MagFlow 2-in-1 magnetic wireless charger; USB-C to USB-C cable, about 1 m; User manual
- Which documents are available?
- Online specifications Open documents
- Not stated by the manufacturer
- output
General
- Brand / model / SKU
- UGREEN / MagFlow UL55963 / 55963
- Product type
- Qi2-certified foldable 2-in-1 magnetic wireless charging stand
- Internal battery
- None; continuous external USB-C power is required
- Phone wireless output
- Up to 25 W under stated compatible device/software/source conditions
- Earbud wireless output
- Up to 5 W for compatible Qi charging cases
- Simultaneous output
- Phone up to 25 W + earbuds 5 W, with a suitable upstream source
- Full 25 W requirement
- Compatible iPhone 16-series device with iOS 26 or later; 45 W+ adapter; suitable cable
- Input connector
- USB-C; 12 V/3 A operating point
- Replacement-cable requirement
- 60 W or higher for the stated full-power setup
- Magnetic system
- 16 magnets; up to 7N gripping force
- Stand function
- Foldable and adjustable, approximately 70° range in official product material; portrait/landscape
- Country of origin
- China
- Manufacturer
- UGREEN Group Limited
Physical
- Package dimensions
- 17 × 10 × 3 cm
- Package weight
- 284g
- Colour
- Grey
- Weight
- 284g (Including box)
Approvals
- Wireless standard
- Qi2 certified; compatible device tier varies by model
- Safety design
- ThermalGuard temperature control and eight-layer protection including abnormal-current/voltage/heat safeguards
- Warranty
- Manufacturer warranty under UGREEN's terms. How claims work
Product attributes and shipping details
| Brand | UGREEN |
|---|---|
| WiFi Standard | Qi2 certified; compatible device tier varies by model |
| Power Output | 25 W |
Downloads
Documentation
- UGREEN 55963 product pageOnline specifications · This model · ugreen.comView official page
Series documents can differ from your exact model. Report a wrong or missing file
Questions about this product
Is a wall adapter included?
No. Use a 45 W or higher USB-C PD adapter for the full 25 W phone mode.
Which phones get 25 W?
iPhone 16-series models running iOS 26 or later, with a 45 W or higher adapter and a suitable cable. Other compatible phones charge at their own supported rate.
Can I use my own cable?
Yes, if it is rated 60 W or higher.
Does it have a battery?
No. It works only while plugged into USB-C power.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.










