At a glance
- Host connector
- USB-A male, USB 3.0
- SATA compatibility
- SATA III, SATA II and SATA I
- Integrated cable length
- 0.5 metre
- Adapter-body dimensions
- Approximately 52.5 × 46 × 13 mm
In the box
- UGREEN 60561 USB-A 3.0 to SATA adapter with integrated 0.5 m cable
UGREEN SATA to USB 3.0 Adapter with UASP and Power (60561)
₹1,180 Incl. GST MRP ₹3,998 70% below MRP
₹1,000 + 18% GST
At a glance
- Host connector
- USB-A male, USB 3.0
- SATA compatibility
- SATA III, SATA II and SATA I
- Integrated cable length
- 0.5 metre
- Adapter-body dimensions
- Approximately 52.5 × 46 × 13 mm
Connects a bare 2.5-inch or 3.5-inch SATA hard drive or SSD to a computer by USB, for backups, cloning or recovering files. Up to 5 Gbps with UASP. 3.5-inch drives need a separate 12 V/2 A power adapter.
- WarrantyManufacturer warranty under UGREEN's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The UGREEN 60561 is an adapter cable that connects a bare 2.5-inch or 3.5-inch SATA hard drive or solid state drive (SSD) to a computer’s USB-A port, with an integrated 0.5 m cable. A 2.5-inch drive runs from USB power; a 3.5-inch drive also needs a separate 12 V, 2 A power supply. It suits backing up, cloning or recovering files from drives taken out of laptops, PCs and recorders.
Is it right for you?
- Suits standard 2.5-inch and 3.5-inch SATA I, II or III hard drives and SSDs.
- Needs a USB-A port; a USB-C-only computer needs a separate data-capable USB-C adapter.
- Suits desk or service use where the drive sits still. It does not protect the drive like a closed enclosure.
- Not for M.2 NVMe, M.2 SATA, IDE/PATA, SAS or proprietary drive connectors.
Key features
- USB 3.0 link up to 5 Gbps, with UASP (USB Attached SCSI Protocol) on compatible systems; works on USB 2.0 and 1.1 ports at reduced speed.
- Combined SATA data and power connector for one drive.
- Drive health (S.M.A.R.T.) and TRIM pass-through where the drive, operating system and software expose them.
- Automatic sleep after about 3 minutes without activity.
- Adapter body about 52.5 × 46 × 13 mm with an integrated 0.5 m cable.
What else you need
A bare SATA hard drive or SSD and a computer with a USB-A port. For a 3.5-inch drive you also need a regulated 12 V, 2 A centre-positive power supply with the correct barrel plug, which is not included. Windows, macOS, Linux and Chrome OS are listed.
Installation
Push the SATA connector onto the drive, plug the USB-A end into the computer and, for a 3.5-inch drive, connect the 12 V supply. Connect directly to a USB 3.0 port before diagnosing low speed. Eject the volume and wait for activity to stop before disconnecting.
Before you buy
- A 3.5-inch drive cannot be used until a correctly specified 12 V, 2 A supply is provided; it is not included.
- Check the drive is a standard 2.5-inch or 3.5-inch SATA drive, not M.2, IDE/PATA or SAS.
- Initialising, repartitioning or formatting can erase existing data. Check the disk’s file system is readable by your operating system.
- It does not clone on its own: cloning needs a second drive and suitable software.
- 5 Gbps file transfers, UASP, S.M.A.R.T. and TRIM are not guaranteed on every host.
- No maximum capacity is stated here because the sources disagree.
- Hard drives, SSDs and computers are not included.
Technical specifications
Key facts
- What is it?
- Storage accessoryBrand UGREEN, model 60561
- What comes in the box?
- UGREEN 60561 USB-A 3.0 to SATA adapter with integrated 0.5 m cable
- Which documents are available?
- Online specifications Open documents
- Brand / SKU
- UGREEN 60561
- Product type
- USB-A 3.0 to SATA drive adapter cable
- Host connector
- USB-A male, USB 3.0
- Drive connector
- Combined SATA data and power connector
- Supported drive types
- 2.5-inch and 3.5-inch SATA HDD / SSD
- SATA compatibility
- SATA III, SATA II and SATA I
- Maximum USB link
- Up to 5 Gbps; real file speed varies
- Storage protocol
- UASP supported on compatible hosts
- Backward USB compatibility
- USB 2.0 and USB 1.1 at reduced speed
- Integrated cable length
- 0.5 metre
- Adapter-body dimensions
- Approximately 52.5 × 46 × 13 mm
- Power for 2.5-inch drives
- USB bus power
- Power for 3.5-inch drives
- Separate 12 V/2 A centre-positive adapter required; not included
- Drive-management functions
- SMART and TRIM support where exposed by the system
- Idle function
- Automatic sleep after about 3 minutes without activity
- Operating systems
- Windows, macOS, Linux and Chrome OS
- Connector type
- USB Type A
- Weight
- 80 g
- Country of origin
- China
- Manufacturer
- UGREEN Group Limited
- Warranty
- Manufacturer warranty under UGREEN's terms. How claims work
Product attributes and shipping details
| Brand | UGREEN |
|---|
Downloads
Documentation
- UGREEN 60561 product pageOnline specifications · This model · uk.ugreen.comView official page
Series documents can differ from your exact model. Report a wrong or missing file
Questions about this product
Does it work with 3.5-inch desktop drives?
Yes, but only with a separate regulated 12 V, 2 A centre-positive power supply, which is not included. 2.5-inch drives run from USB power.
Does it work on a USB-C laptop?
Only through a separate data-capable USB-C adapter. The plug is USB-A.
Can it clone a drive by itself?
No. Cloning needs a computer, a second drive and suitable software.
What is the maximum drive size?
Not stated by the manufacturer: the sources disagree.
Do I need a driver?
No. It works as standard USB storage on Windows, macOS, Linux and Chrome OS.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.






