ZKTeco FaceDepot-8AL IP68 Face Recognition Access Terminal

Overview

The ZKTeco FaceDepot-8AL is a face recognition door terminal for entrances that have to keep working outside, in bad weather and in poor light. Its IP68 and IK04 rated body works from -30 to 60 °C, a starlight camera reads faces from 0.5 lux up to full sunlight, and it verifies a face in 0.3 seconds. It suits access points at hospitals, factories, schools, airports and stations, and holds 30,000 faces as standard.

Is it right for you?

• It suits an outdoor or exposed entrance where other face terminals would need shelter.
• It suits large head counts: 30,000 faces (50,000 as an option) and 50,000 users and cards.
• A distance sensor wakes it as someone approaches, up to 2.5 m away.
• There is no fingerprint reader on the unit; fingerprint, RFID, barcode or QR code come from a slave reader wired to it.

Key features

• Face verification in 0.3 seconds with the ZKLiveFace 5.8 algorithm and liveness detection.
• Holds 30,000 faces as standard (50,000 as an option), 50,000 users and cards, 30,000 user photos and 10,000 event photos.
• Keeps 1,000,000 transactions as standard or 2,000,000 as an option.
• IP68 (dust tight and protected against immersion) and IK04 impact rating; works from -30 to 60 °C and up to 93% humidity.
• 2 MP WDR (wide dynamic range) starlight camera working from 0.5 lux to 50,000 lux; 8-inch IPS touch screen with a 400 lux high-brightness backlight and an adjustable LED.
• Reads 125 kHz EM cards, with a 13.56 MHz S50/S70 IC card reader as an option.
• Wiring for a lock relay output, alarm output, auxiliary input, exit button and door sensor, over TCP/IP, Wiegand input or output, RS485, RS232 or optional Wi-Fi; accepts a Wiegand, RS485 or RS232 slave reader for RFID, barcode or QR code credentials, and a security relay box.
• Access levels, groups, holidays, DST (daylight saving time), duress mode by password, anti-passback, record query, tamper switch alarm, event snapshot and custom wallpaper and screen saver; Hi-Fi voice, microphone, reset button and tamper switch; 227 x 143 x 26.1 mm, 853 g.

What else you need

A 12 V DC supply; the terminal draws less than 2,000 mA. For door control, an electric lock, exit button and door sensor, and a security relay box if you want the lock relay kept inside the building, all of which are separate items. A network point, or the optional Wi-Fi.

Installation

An access control installer should fit it. The job involves wall mounting at the entrance, wiring 12 V DC, the lock (directly or through the security relay box), exit button, door sensor and any slave reader, connecting the network, then enrolling users and adding it to the software.

Software and licences

It is managed from ZKTeco access control and attendance software over the network. Tell us which software you run and we will confirm compatibility in the quotation. HTTPS communication encryption is an option.

Before you buy

• Wi-Fi, the IC card reader, HTTPS encryption and the larger face and transaction capacities are specified at order time: list what you need with your quote request.
• The lock, exit button, door sensor and relay box are separate items.