At a glance
- Card Type
- Z-ID 125 kHz RFID card (standard)
- Communication
- RS485
- Power Supply
- 12 V DC
- Dimensions
- 121.3 × 77.3 × 38 mm (L×W×H)
- Power Consumption
- 0.72 W standby (12 V × 60 mA)
Model FR1500SZKTeco FR1500S Flush-Mount RS485 Fingerprint Reader
₹10,680 Incl. GST
₹9,051 + 18% GST
At a glance
- Card Type
- Z-ID 125 kHz RFID card (standard)
- Communication
- RS485
- Power Supply
- 12 V DC
- Dimensions
- 121.3 × 77.3 × 38 mm (L×W×H)
- Power Consumption
- 0.72 W standby (12 V × 60 mA)
Fingerprint reader that fits a standard single gang wall box at the door and connects to an inBio or inBio Pro controller, which keeps the users and access rules. IP65 rated, reads 125 kHz cards as standard, wired over RS485.
- WarrantyManufacturer warranty under ZKTeco's terms: 1 year. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
- InstallationFlush-mounted, single gang standard junction box
Overview
The ZKTeco FR1500S is a flush-mounted fingerprint reader for a door where a slim, neat face plate matters more than an on-board display. It fits a standard single gang wall box and reports to an inBio or inBio Pro controller over RS485, so users and access rules live in the controller rather than on the reader. Its IP65 rating allows outdoor and semi-enclosed positions as well as indoor doors.
Is it right for you?
- It suits a system built on inBio or inBio Pro controllers, or a standalone fingerprint device with an RS485 reader port.
- It is a reader only: it cannot control a door by itself.
- IP65 rated and -10 to 45 °C, so it suits a sheltered outdoor door.
- It suits a place that issues 125 kHz cards as standard, with HID Prox, 13.56 MHz IC or HID iClass modules as options.
Key features
- Z-ID fingerprint sensor driven by a 1.0 GHz processor on the ZKFinger V10.0 algorithm.
- IP65 rated, dust tight and resistant to water splashes from any direction.
- Stainless steel front casing with a three-colour indicator and buzzer for access status.
- Reads Z-ID 125 kHz RFID (radio frequency identification) cards as standard.
- Optional card modules for 125 kHz HID Prox, 13.56 MHz IC (S50 and S70) and 13.56 MHz HID iClass.
- Runs on 12 V DC, drawing 0.72 W on standby and peaking at 140 mA during a scan.
- 121.3 × 77.3 × 38 mm, flush mounted in a single gang junction box.
What else you need
- An inBio or inBio Pro controller, or a standalone fingerprint device with an RS485 reader port.
- A 12 V DC supply and RS485 cabling to each reader position.
- A single gang back box at each reader position.
- The matching card module, only if your cards are not 125 kHz Z-ID.
Installation
An access control installer should fit it. The reader sits flush in a single gang box at the door and wires back to the controller over RS485 with 12 V DC power. The controller then connects over TCP/IP to the management software.
Software and licences
The reader has no software of its own. The inBio and inBio Pro controllers it reports to connect over TCP/IP to ZKBioSecurity3.0 or ZKBio Access.
Before you buy
- It is a reader, not a controller.
- The HID Prox, IC and HID iClass modules are options to specify at order time.
- For a quote, tell us your door count and card technology and we will match the controller.
Features
Size and fit
- Dimensions
- 121.3 × 77.3 × 38 mm (L×W×H)
- Installation
- Flush-mounted, single gang standard junction box
- Net Weight
- 14.2g
Technical specifications
Key facts
- How is it powered?
- 12 V DC
- Does it support RS-485?
- Yes
- Does it support OSDP?
- Yes
- Can it be used outdoors?
- IP65Indoor / Outdoor / Semi-Enclosed Area
- Which documents are available?
- Installation / drawing, datasheet, online specifications Open documents
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Not stated by the manufacturer
- PoE, wiegand, box contents
RelatedSolutionOffice access controlSolutionPedestrian entrance controlGuideAccess control door setup checklistDocumentsAll ZKTeco documents
Output
- Voltage
- 12 V DC
- Peak Current of Fingerprint Scanning
- 140 mA
Input
- Power Consumption
- 0.72 W standby (12 V × 60 mA); peak current 140 mA during fingerprint scanning
- Power Supply
- 12 V DC
- Power Consumption under Stand-by Mode
- 12 V * 60 mA = 0.72 W
Environment
- Operating Temperature
- -10 °C to 45 °C
- Operating Humidity
- 20% to 95%
- Operating Environment
- Indoor / Outdoor / Semi-Enclosed Area
Physical
- Material
- Stainless steel front casing
- Dimensions
- 121.3 × 77.3 × 38 mm (L×W×H)
- Net Weight
- 14.2g
- Gross Weight
- 24.4g
Approvals
- Standard Functions
- Z-ID 125 kHz RFID card reading, buzzer prompt
Other
- Biometric Algorithm
- ZKFinger V10.0
- Card Type
- Z-ID 125 kHz RFID card (standard); 125 kHz HID Prox card, 13.56 MHz IC card (S50 / S70), 13.56 MHz HID iClass card (optional)
- Hardware
- CPU of 1.0 GHz, Z-ID fingerprint sensor, buzzer, three-colour indicator
- Access Control Interfaces
- RS485
- Optional Functions
- 125 kHz HID Prox card, 13.56 MHz IC card (S50 / S70), 13.56 MHz HID iClass card
- Installation
- Flush-mounted, single gang standard junction box
- Algorithm Version
- ZKFinger V10.0
- Compatibility
- inBio / inBioPro Controllers, Standalone Fingerprint Devices
- Communication
- RS485
- Warranty
- Manufacturer warranty under ZKTeco's terms: 1 year. How claims work
Product attributes and shipping details
| Brand | ZKTeco |
|---|---|
| Environment | Indoor/Outdoor |
| Verification | Card, Fingerprint |
| Connectivity | OSDP, RS-485 |
| IP Rating | IP65 |
| Supply Voltage | 12 V DC |
Downloads
Documentation
- ZKTeco FR1500S datasheetDatasheet · This model · d1agmp9y4cki1i.cloudfront.netDownload
- ZKTeco FR1500S product pageOnline specifications · This model · zkteco.inView official page
Installation guide
- ZKTeco FR1500S installation drawingInstallation / drawing · This model · d1agmp9y4cki1i.cloudfront.netDownload
Series documents can differ from your exact model. Report a wrong or missing file
Software and compatibility
Licence terms are on each software product page.
- ZKBioSecurity3.0 Listed compatible
- ZKBio Access Listed compatible
- inBio Listed compatible
- inBio Pro Listed compatible
Questions about this product
Does the FR1500S work on its own?
No. It is a reader that reports to an inBio or inBio Pro controller, or a standalone fingerprint device, over RS485.
Can it be fitted outdoors?
Yes, in a sheltered or semi-enclosed position. It is IP65 rated and works from -10 to 45 °C.
What power does it need?
12 V DC, at 0.72 W on standby and a 140 mA peak during a scan.
Which cards does it read?
Z-ID 125 kHz cards as standard. HID Prox, 13.56 MHz IC (S50 and S70) and HID iClass need the optional modules.
What box does it fit?
A standard single gang junction box, flush mounted.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.