ZKTeco ZK-D1065 Walk-Through Metal Detector

Overview

The ZKTeco ZK-D1065 is a walk-through metal detector, also called a door frame metal detector (DFMD), with 6 detection zones. When someone carrying metal passes through, it alarms and shows which zone was triggered, so the guard knows roughly where to check. It is designed for places with a high flow of people, such as exhibition centres, government offices, electronics factories, prisons, banks and hotels.

Is it right for you?

• It suits a checkpoint that needs a rough position of the metal without the cost of an 18-zone unit.
• For a basic yes or no alarm, the ZK-D1010L is the single-zone alternative; for finer position, the 18-zone ZK-D2180 or ZK-D3180V.
• Check the doorway: the frame is 2,213 mm high, 831 mm wide and 471 mm deep and ships at 40 kg.

Key features

• 6 detection zones, each with 100 adjustable sensitivity levels.
• 3.5-inch LCD display.
• People counting and alarm counting.
• Sound and LED alarm at the same time, at 85 dB.
• Fire-retardant materials and a waterproof base.
• Anti-interference design, harmless to the human body.
• Working frequency 5.7 to 9.6 kHz; 12 V DC 1.4 A internally from 100 to 240 V AC mains, 16 W.

What else you need

A 100 to 240 V AC mains socket. It runs on its own with no software. A hand-held metal detector for follow-up checks and, at busy checkpoints, an X-ray baggage scanner for bags.

Installation

A security equipment installer should fit and commission it. Check doorway height and floor space, connect mains power and set the zone sensitivities on site, away from large moving metal objects. Working range is -20 to 55 °C with humidity under 95%.

Before you buy

• Check doorway height and floor space against the 2,213 x 831 x 471 mm frame.
• Sensitivity is set on site: keep it clear of large moving metal objects.