Grandstream GRP2610P PoE Colour Screen IP Phone, 2 Lines, 2 SIP

Overview

A Power over Ethernet (PoE)-cabled office can have a colour-screen phone at entry level with one cable per desk. The Grandstream GRP2610P is the PoE model of the GRP2610: a two-line desk phone with a 2.4 inch colour screen, up to eight virtual busy lamp field (BLF) keys, high-definition (HD) audio and Noise Shield, powered from an IEEE 802.3af switch port. No adapter is supplied.

Is it right for you?

• Suits PoE-cabled offices that want a colour-screen phone at entry level with central power backup.
• Suits roll-outs provisioned centrally through Grandstream Device Management System (GDMS).
• Choose the GRP2610 instead if your switch has no PoE: it comes with a power adapter, this model does not.
• Choose the GRP2611G if you need three lines, a 2.8 inch screen and Gigabit ports.

Key features

• 2 lines and 2 Session Initiation Protocol (SIP) accounts, so one desk can handle two calls or two numbers.
• 2.4 inch colour screen (320 x 240) whose 2 line keys page through up to 8 virtual BLF keys, so a small office can watch colleagues’ lines without a key module.
• Two switched 10/100 Mbps network ports, so a computer can share the desk’s network cable through the phone, with built-in PoE (IEEE 802.3af) so the phone can draw power from a PoE switch.
• HD wideband audio on the handset and speakerphone, and 5-way audio conferencing with Opus and G.722 codecs, so calls sound clear and a small group can join one call.
• Noise Shield, which cuts background sound on your side of the call.
• Swappable faceplate, so you can add your company logo.
• XML screen customisation, a 1,000-entry phonebook and a 1,000-record call log.
• Zero-touch cloud provisioning through GDMS, with secure boot and encrypted data storage.

What else you need

• A SIP account for each line, from a phone system (IP PBX) in your building or in the cloud, or from a hosted voice over IP (VoIP) provider. The phone registers to any of them over standard SIP.
• An IEEE 802.3af PoE switch port or PoE injector. No power adapter is supplied, so if your switch has no PoE, order a 5 V DC, 0.6 A adapter separately.
• A network cable to the desk: this model has no Wi-Fi.
• Only if you want the phone on a wall, the GRP_WM_A wall mount bracket, sold separately.
• Only if you want a wired headset, one with an RJ9 plug; electronic hook switch (EHS) control works with Plantronics headsets.

Installation

A desk phone is a plug-in job that an office IT person or phone installer can do: fit the handset cord, connect the network cable and a PoE switch port or injector, then enter the SIP account details in the phone’s web interface. For a roll-out of many phones, an installer can push the settings through GDMS or TR-069 instead.

The supplied desk stand gives two desk angles.

For wall use, fit the GRP_WM_A bracket. Screws and wall anchors are not included with the bracket, so match them to your wall. Reverse the hookswitch tab under the handset rest so the handset stays put when the phone is upright.

Software and licences

GDMS cloud provisioning and TR-069 let an installer or IT team configure, monitor and update phones centrally, and the web interface covers a single phone. Grandstream’s Click2Dial browser extension places calls from a computer.

Before you buy

• No power adapter is supplied. Plan on an IEEE 802.3af PoE switch port or injector, or order a 5 V DC, 0.6 A adapter separately.
• Power draw is 3.8 W at most on PoE.
• The GRP_WM_A wall mount bracket is sold separately and comes without screws or wall anchors.
• It does not take an expansion module.
• It is made for indoor desks, with an operating range of 0 to 40 °C.