Nice Robus 1000 RB1000 Sliding Gate Kit, up to 1000 kg, without Flashing Light

Overview

This Nice Robus 1000 kit (RB1000) automates a heavy sliding gate of up to 1000 kg and leaves out the flashing light, for a gate where a light is already fitted or will be chosen separately. It suits a large home or business gate. The RB1000 gearmotor has a 24 V DC motor fed from 230 V AC mains, a built-in control unit, an electromechanical limit switch and an OXIBD plug-in two-way radio receiver, with accessories connected over Nice BlueBUS on two wires. The kit adds two four-button remotes and a pair of BlueBUS photocells.

Is it right for you?

• It suits a sliding gate weighing up to 1000 kg; check the gate weight and leaf length against the limits in the specifications.
• It is rated for 50 cycles per hour, so it copes with a busy home or business gate.
• Choose this version if you do not need a flashing light in the kit; the Nice RB1000BDKCE kit adds the ELDC flashing LED light to the same parts.
• The gearmotor is IP44 rated and works from -20 to 50 °C, so it is made for fitting beside the gate outdoors.

Key features

• 24 V DC motor powered from 230 V AC mains, drawing 2.3 A and 450 W.
• 900 N of force, moving the gate at 0.28 m/s.
• Non-reversible electromechanical gearmotor with an electromechanical limit switch, so the gate stops in the right place at each end of its travel.
• OXIBD plug-in bidirectional radio receiver for two-way remotes, with accessories connected over Nice BlueBUS on two wires.
• Two MYGO4 four-channel 433.92 MHz remotes, so each remote can also control other Nice automations.
• EPMB surface-mounted BlueBUS photocell pair stops the gate when something crosses the beam.
• Gearmotor 330 x 210 x 303 mm and 13 kg, IP44, -20 to 50 °C.

What else you need

• A module 4 rack for the full length of the gate travel; the rack is not included. Nylon racks are rated up to 800 kg (ROA66), so a heavier gate needs a galvanised ROA7 or ROA8 rack.
• A 230 V AC, 50/60 Hz mains supply at the gate.
• A flashing light if you want one: choose the ELDC, which matches this 24 V control unit.
• BlueBUS photocells if you add more pairs.

Installation

A gate automation installer should fit it. The job involves fixing the gearmotor on a base beside the gate, bringing the 230 V AC supply to it, fitting the module 4 rack along the gate leaf, setting the limit switch, wiring the BlueBUS photocells and any flashing light to the control unit, and programming the two remotes into the OXIBD receiver.

Before you buy

• The rack is not included: order a module 4 rack for the full length of the gate travel; nylon racks are rated up to 800 kg (ROA66), so heavier gates need a galvanised ROA7 or ROA8 rack.
• No flashing light is supplied; the Nice RB1000BDKCE kit adds the ELDC flashing LED light to these parts.
• Use BlueBUS photocells; non-BlueBUS photocells and mains-voltage flashing lights such as the ELAC are not suitable for this control unit.
• Kit contents are as supplied and are confirmed when you order.
• The OXIBD radio receiver is not compatible with the O-box functions of the Opera system.