Nice Toona 4 TO4005 Swing Gate Kit, Two Leaves up to 3 m, 230 V

Overview

The Nice Toona 4 kit (TO4005) automates a double swing gate with leaves up to 3 m, so both leaves open and close from a remote; the 230 V AC gearmotors are the better choice for a gate in a windy, exposed place. It suits a home or business with a pair of hinged gates. The kit has two fast TO4005 gearmotors driven by an MC800 control unit with a plug-in two-way radio receiver, plus two remotes. Photocells and a flashing light are not included.

Is it right for you?

• It suits a double-leaf swing gate with each leaf up to 3 m; check the leaf length and weight against the operating limits in the specifications, as gate shape, height and strong wind reduce them.
• Choose the 230 V version for a windy, exposed location.
• It is rated for 58 cycles per hour, so it suits a gate that is used often.
• Choose this kit if you will add your own photocells and flashing light.
• The gearmotors are IP44 rated and work from -20 to 50 °C, so they are made for fitting on the gate outdoors.

Key features

• Two non-reversible, fast, surface-mounted 230 V AC electromechanical gearmotors with a limit switch in opening.
• 230 V AC, 50 Hz motors drawing 1.5 A and 340 W each, with 1800 N of force.
• MC800 control unit drives both motors, with the OXIBD plug-in bidirectional receiver for two-way remotes.
• Two INTI2 two-channel 433.92 MHz remotes.
• Each gearmotor is 820 x 115 x 105 mm and 6 kg, IP44, -20 to 50 °C.

What else you need

• A pair of photocells: the control unit works with EPS, EPM and EPL photocells, the EPMOR and EPMORB reflective photocells and the EPMOW wireless photocell.
• A flashing light: with the MC800, use the ELAC mains-voltage flashing light.
• A 230 V AC, 50 Hz mains supply at the gate.
• The control unit also works with OXILR receivers, ERA INTI, ERA ONE / MYGO, MYGOBD and ERA ONE LR remotes and F210, FT210 and F210B safety devices.

Installation

A gate automation installer should fit it. The job involves fixing a gearmotor to each gate post and leaf, mounting the MC800 control unit and bringing the 230 V AC supply to it, wiring both motors, the photocells and the flashing light, and programming the remotes into the OXIBD receiver.

Before you buy

• Photocells and a flashing light are not included; add a pair of photocells and, with the MC800, the ELAC mains-voltage flashing light.
• Check the leaf length and weight against the operating limits in the specifications; gate shape, height and strong wind reduce them.
• Kit contents are as supplied and are confirmed when you order.
• The OXIBD radio receiver is not compatible with the O-box functions of the Opera system.