Nice Too TOO3000 Swing Gate Kit, Two Leaves up to 3 m, 230 V

Overview

The Nice Too kit (TOO3000) automates a double swing gate with leaves up to 3 m and 300 kg each, so both leaves open and close from a remote. It suits a home or small business with a pair of hinged gates. The kit has two TOO3000 230 V AC telescopic gearmotors with 400 mm travel, driven by an MC800 control unit with a plug-in two-way radio receiver, plus two remotes. Photocells and a flashing light are not included.

Is it right for you?

• It suits a double-leaf swing gate with each leaf up to 3 m long and 300 kg; check the leaf length and weight before ordering.
• It is rated for 24 cycles per hour, which suits a home or small office gate rather than one in constant use.
• Choose this kit if you will add your own photocells and flashing light; the Nice TOO3000KCE kit adds EPM photocells, the ELAC flashing light and a TS sign to the same parts.
• The gearmotors are IP54 rated and work from -20 to 50 °C, so they are made for fitting on the gate outdoors.

Key features

• Two telescopic, surface-mounted electromechanical gearmotors with a stainless steel rod and an epoxy powder-coated aluminium body.
• 230 V AC, 50/60 Hz motors drawing 1.1 A and 250 W each, with 300 N of force and 400 mm of travel.
• Key release on top of each motor, so the gate can be freed and moved by hand.
• MC800 control unit drives both motors, with the OXIBD plug-in bidirectional receiver for two-way remotes.
• Two INTI2 two-channel 433.92 MHz remotes.
• Each gearmotor is 700 x 100 x 177 mm and 5.5 kg, IP54, -20 to 50 °C.

What else you need

• A pair of photocells: the control unit works with EPS, EPM and EPL photocells, their BlueBUS versions EPSB, EPMB and EPLB, the EPMOR and EPMORB reflective photocells and the EPMOW wireless photocell.
• A flashing light: with the MC800, use the ELAC mains-voltage flashing light.
• A 230 V AC, 50/60 Hz mains supply at the gate.
• The control unit also works with OXILR receivers, ERA INTI, ERA ONE / MYGO, MYGOBD and ERA ONE LR remotes and F210, FT210 and F210B safety devices.

Installation

A gate automation installer should fit it. The job involves fixing a gearmotor to each gate post and leaf, mounting the MC800 control unit and bringing the 230 V AC supply to it, wiring both motors, the photocells and the flashing light, and programming the remotes into the OXIBD receiver.

Before you buy

• Photocells, a flashing light and a sign are not included; the Nice TOO3000KCE kit adds EPM photocells, the ELAC flashing light and a TS sign to these parts.
• With the MC800, use the ELAC mains-voltage flashing light.
• Check the leaf length and weight against the limits in the specifications.
• Kit contents are as supplied and are confirmed when you order.
• The OXIBD radio receiver is not compatible with the O-box functions of the Opera system.