Nice Too TOO3024 Swing Gate Kit, Two Leaves up to 3 m, 24 V

Overview

The Nice Too kit (TOO3024) automates a double swing gate with leaves up to 3 m and 300 kg each, so both leaves open and close from a remote, and its 24 V DC gearmotors can run on Nice Solemyo solar power where mains is hard to bring to the gate. It suits a home or small business with a pair of hinged gates. The kit has two TOO3024 telescopic gearmotors with 400 mm travel, driven by the MC424L control unit with a built-in radio receiver, plus two remotes. Photocells and a flashing light are not included.

Is it right for you?

• It suits a double-leaf swing gate with each leaf up to 3 m long and 300 kg; check the leaf length and weight before ordering.
• Choose the 24 V version if you want a continuous working cycle, battery backup with the optional PSS124, or solar power with the optional SYKCE30 Solemyo kit.
• Choose this kit if you will add your own photocells and flashing light; the Nice TOO3024KCE kit adds EPM photocells, the ELDC flashing light and a TS sign to the same parts.
• The gearmotors are IP54 rated and work from -20 to 50 °C, so they are made for fitting on the gate outdoors.

Key features

• Two telescopic, surface-mounted electromechanical gearmotors with a stainless steel rod and an epoxy powder-coated aluminium body.
• 24 V DC motors drawing 30 W nominal and 120 W maximum each, with 300 N nominal and 1800 N maximum force and 400 mm of travel.
• Continuous working cycle, so the gate can be used often without waiting for the motors to rest.
• Key release on top of each motor, so the gate can be freed and moved by hand.
• MC424L control unit with integrated radio receiver drives both motors.
• Two INTI2 two-channel 433.92 MHz remotes.
• Each gearmotor is 700 x 100 x 177 mm and 5.5 kg, IP54, -20 to 50 °C.

What else you need

• A pair of photocells and a flashing light: use the ELDC, which matches this 24 V control unit.
• A mains supply for the MC424L control unit, or the optional SYKCE30 Solemyo solar kit.
• Only if you want the gate to run during a power cut: the optional PSS124 battery.

Installation

A gate automation installer should fit it. The job involves fixing a gearmotor to each gate post and leaf, mounting the MC424L control unit and bringing power to it, wiring both motors, the photocells and the flashing light, and programming the remotes into the built-in receiver.

Before you buy

• Photocells, a flashing light and a sign are not included; the Nice TOO3024KCE kit adds EPM photocells, the ELDC flashing light and a TS sign to these parts.
• Use the ELDC; the ELAC is a mains-voltage light and must not be connected to this 24 V control unit.
• The PSS124 battery and SYKCE30 solar kit are optional.
• Check the leaf length and weight against the limits in the specifications.
• Kit contents are as supplied and are confirmed when you order.
• The built-in radio receiver is not compatible with the O-box functions of the Opera system.