Nice Walky WALKY1024BDKCE Swing Gate Kit, Single Leaf up to 1.8 m

Overview

The Nice Walky kit (WALKY1024BDKCE) automates a single swing gate leaf up to 1.8 m, such as a wooden, PVC or pedestrian gate, so it opens and closes from a remote. It suits a home side gate, garden gate or small entrance, and is compact enough to fit on a post just 8 cm wide. The WL1024C gearmotor has a 24 V DC motor fed from 230 V AC mains, an articulated arm, an integrated control unit and an OXIBD plug-in two-way radio receiver, and the kit adds two four-button remotes. Photocells and a flashing light are not included.

Is it right for you?

• It suits a single-leaf swing gate up to 1.8 m, including wood and PVC gates and pedestrian gates.
• Choose it where the gate post is small: it fits posts 8 cm wide.
• It is rated for 50 cycles per hour, so it copes with a gate that is used often during the day.
• For a double gate, Nice offers the separate WALKY2024BDKCE kit.
• The gearmotor is IP44 rated and works from -20 to 50 °C, so it is made for fitting on the gate outdoors.

Key features

• Compact, non-reversible 24 V DC electromechanical gearmotor with an articulated arm, powered from 230 V AC mains and drawing 0.8 A and 120 W.
• 120 Nm of torque at 1.5 to 2.2 rpm.
• Integrated control unit and OXIBD plug-in bidirectional receiver, so two-way remotes can confirm commands.
• Two MYGO4 four-channel 433.92 MHz remotes, so each remote can also control other Nice automations.
• Room inside the motor for the optional PS424 buffer battery, so the gate can keep working during a power cut.
• Gearmotor 90 x 125 x 385 mm and 4.8 kg, IP44, -20 to 50 °C.

What else you need

• A pair of BlueBUS photocells such as EPSB or EPMB.
• A flashing light: the ELDC flashing LED light or the WLT multifunction LED light. Mains-voltage lights such as the ELAC are not suitable.
• A 230 V AC, 50/60 Hz mains supply at the gate.
• Only if you want the gate to run during a power cut: the optional PS424 buffer battery, which fits inside the motor.
• The control unit also works with OXILR receivers, ERA INTI, ERA ONE / MYGO, MYGOBD and ERA ONE LR remotes, EPLB photocells, the EPMORB reflective and EPMOW wireless photocells and the F210B BlueBUS safety device.

Installation

A gate automation installer should fit it. The job involves fixing the gearmotor to the post and connecting the articulated arm to the leaf, bringing the 230 V AC supply to it, wiring the BlueBUS photocells and the flashing light to the integrated control unit, and programming the remotes into the OXIBD receiver.

Before you buy

• Photocells and a flashing light are not included. Add BlueBUS photocells such as EPSB or EPMB and the ELDC flashing light or WLT multifunction LED light; mains-voltage lights such as the ELAC are not suitable.
• The PS424 buffer battery fits inside the motor and is optional.
• For a double gate, Nice offers the separate WALKY2024BDKCE kit.
• The OXIBD radio receiver is not compatible with the O-box functions of the Opera system.