MORX U Bracket for 600 lbs EM Lock

Overview

The MORX U Bracket for 600 lbs EM Lock clamps over the top edge of a frameless glass door so the armature plate of a 600 lbs electromagnetic (EM) lock can be fitted without drilling the glass. The lock’s magnet stays on the header above, and the door closes onto a standard lock. It suits frameless glass doors in offices, showrooms and clinics that have no frame or rail to screw an armature into.

Is it right for you?

• It suits a frameless glass door with a clean top edge.
• It is sold for MORX 600 lbs single-door EM locks.
• For an inward-opening framed door, use a Z bracket instead; where the header is too narrow for the magnet, use an L bracket.
• For an electric drop bolt on a glass door, use the MORX U Bracket for Drop Bolt Lock.

Key features

• U-section bracket that clamps on the glass edge, so no drilling of the glass.
• Carries the armature plate of a 600 lbs EM lock.

What else you need

• A MORX 600 lbs EM lock mounted on the header above.

Installation

Measure the glass and check the bracket on receipt. The glass edge must be clean and the bracket must sit level so the armature meets the magnet squarely. An access control installer should fit the bracket, then align the lock body on the header before tightening.

Before you buy

• The glass thickness range, dimensions and material are not stated by the manufacturer; measure the glass and check the bracket on receipt.
• Check the hole pattern against the lock on receipt.