MORX Z Bracket for 600 lbs EM Lock

Overview

The MORX Z Bracket for 600 lbs EM Lock is a Z-section aluminium bracket that lets an electromagnetic (EM) lock be fitted on a door that opens inward, away from the side where the lock body is mounted. It steps the lock body out from the frame header so the armature plate on the door still meets the magnet squarely. It suits office, shop and apartment doors that open inward.

Is it right for you?

• It suits an in-swing door that opens to 90 degrees.
• It is sold for MORX 600 lbs single-door EM locks; the Z bracket range covers models ZB-350, ZB-600, ZB-800 and ZB-1200, one per lock size, so order the 600 lbs version only for 600 lbs locks.
• For a narrow or recessed header on an outward-opening door, use the L bracket. For a frameless glass door, use the U bracket.

Key features

• Designed for in-swing doors with a 90-degree opening.
• High-strength aluminium, sandblast finish, anodised.
• Sold for MORX 600 lbs EM locks.

What else you need

• A MORX 600 lbs EM lock: the Red LED, Feedback, Timer and Feedback or Remote Switch version.
• Fixings suited to the frame material.

Installation

The door and frame must be square. An access control installer should fit the bracket to the frame header first, then align the lock body on the bracket and the armature on the door so they meet squarely before tightening. Check the hole pattern against the lock on receipt.

Before you buy

• Order the 600 lbs version only for 600 lbs locks.
• Check the hole pattern against the lock on receipt.