At a glance
- Holding Force
- 600 lb
- Fail Mode
- Fail-safe
- Door Type
- Single door
In the box
- Remote switch
MORX 600 lbs EM Lock with Remote Switch
₹4,012 Incl. GST
₹3,400 + 18% GST
At a glance
- Holding Force
- 600 lb
- Fail Mode
- Fail-safe
- Door Type
- Single door
Electromagnetic (EM) lock for a single door, supplied with a remote switch so the door can be released with the remote as well as by the access system. 600 lbs holding force; releases on a power cut.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX 600 lbs EM lock with Remote Switch is an electromagnetic (EM) lock for a single door, supplied with a remote switch so the door can be released from the remote as well as by the access system. An electromagnet on the frame holds a steel plate on the door while powered and releases the moment power is cut. It suits glass, aluminium and wooden office doors on card, PIN or fingerprint access control.
Is it right for you?
- It suits a single door that someone inside, such as a receptionist, should be able to release remotely.
- It suits glass, aluminium and wooden doors, with no moving latch to wear.
- It is fail-safe, so it suits escape route doors that must open on a power cut or fire alarm.
- If the controller needs to know the door is locked, choose the 600 lbs EM lock with Feedback or with Timer and Feedback.
Key features
- 600 lbs holding force class.
- Supplied with a remote switch for releasing the door.
- Electromagnetic, fail-safe operation: unlocked when power is off.
What else you need
- A regulated DC power supply rated for the lock current.
- An access controller, standalone reader or exit button with a relay output to switch the lock.
- A MORX exit button to release the door from inside.
- A MORX L, Z or U bracket for 600 lbs locks when the frame or door has no flat mounting face.
- A fire alarm interface to cut lock power, normally required for escape doors.
Installation
An access control installer should mount the magnet on the frame header on the push side and the armature plate on the door so they meet squarely, using an L, Z or U bracket where needed, and wire the remote switch into the lock circuit. Check the bracket hole pattern against the lock on receipt.
Before you buy
- Dimensions, supply voltage and current for this version are not stated by the manufacturer; confirm them from the unit label before choosing a power supply and brackets.
- The door opens whenever power is cut, so add a backed-up supply if it must stay locked through a power cut.
Technical specifications
Key facts
- What is it?
- Magnetic / EM LocksBrand MORX
- What comes in the box?
- Remote switch
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- power
- Holding Force
- 600 lb
- Fail Mode
- Fail-safe (electromagnetic)
- Door Type
- Single door
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|
Works with this product
Relevant accessories
- MORX L Bracket for 600 lbs EM LockSUP-MORX-L-BRACKET-FOR-600-LBS
Why L bracket sold for 600 lbs MORX EM locks. Condition: Bracket and lock are both for 600 lbs; check hole pattern on receipt.
₹299Add to cart - MORX Z Bracket for 600 lbs EM LockSUP-MORX-Z-BRACKET-FOR-600-LBS
Why Z bracket sold for 600 lbs MORX EM locks. Condition: Bracket and lock are both for 600 lbs; check hole pattern on receipt.
₹556Add to cart - MORX U Bracket for 600 lbs EM LockSUP-MORX-U-BRACKET-FOR-600-LBS
Why U bracket sold for 600 lbs MORX EM locks. Condition: Bracket and lock are both for 600 lbs; check hole pattern on receipt.
₹299Add to cart - MORX MS-1 Stainless Steel Exit Button (NO/NC/COM)MS-1
Why Exit button to release the door from inside. Condition: Wire through controller or lock supply; confirm lock current.
₹368Add to cart
Upgrades
- MORX 600 lbs EM Lock with Timer and FeedbackEL-600
Why Documented 600 lbs EM lock with timer and feedback output. Condition: Published specs: 12/24 V DC, 500 mA at 12 V.
₹2,267Add to cart
Other models in the series
- MORX 600 lbs EM Lock with Red LEDSGH-ACC-7902
Why MORX 600 lbs single-door EM lock, different status option. Condition: Same holding-force class.
₹1,540Add to cart - MORX 600 lbs EM Lock with FeedbackSGH-ACC-7904
Why MORX 600 lbs single-door EM lock, different status option. Condition: Same holding-force class.
₹1,882Add to cart
Questions about this product
What does the remote switch do?
It releases the door from the remote, in addition to the access controller or exit button.
What happens in a power cut?
The lock releases and the door opens. Use a backed-up supply if the door must stay locked.
What power does it need?
Not stated by the manufacturer for this version. Check the unit label and use a regulated DC supply rated for the lock current.
Do I need a bracket?
Only if the frame or door has no flat mounting face. MORX L, Z and U brackets are sold for 600 lbs locks.
Which doors does it suit?
Single glass, aluminium or wooden doors, mounted on the push side.
Ask about this modelDoor fit, access methods, installation
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.