ZKTeco FaceDepot-7BL Face Attendance and Access Control Terminal

Overview

The ZKTeco FaceDepot-7BL runs door access and staff attendance from one wall unit, reading a person’s face as they walk up rather than making them stop square to the lens: it works at up to 2 m and 30 degrees off centre either way. It suits offices, factory gates and reception doors where a touchless face terminal is wanted instead of a contact reader. It holds 10,000 faces as standard, with 100,000 as an option.

Is it right for you?

• It suits a doorway where people approach at an angle or do not stop, thanks to the 2 m range and 30 degree tolerance.
• It suits large head counts: 10,000 faces as standard, expandable to 100,000.
• Fingerprint and card reading are optional modules, so order them if you need a backup to face.
• It is for indoor use, rated 0 to 45 °C.

Key features

• Face recognition in 1 second or less at up to 2 m, with pose angles up to plus or minus 30 degrees.
• Anti-spoofing against printed photos (laser, colour and black and white), video and 3D mask attacks.
• Holds 10,000 faces as standard (100,000 as an option), with optional fingerprint (10,000, ZKFinger V10.0) and card (10,000) modules, and 200,000 transactions.
• 7-inch touch screen with a 2 MP WDR (wide dynamic range) low light camera and an LED supplement light with adjustable brightness.
• 900 MHz dual-core processor with 512 MB RAM and 8 GB storage on Linux.
• Card options: 125 kHz EM ID cards or 13.56 MHz IC cards.
• Wiring for a third-party electric lock, door sensor, exit button, alarm output and auxiliary input, with Wiegand input and output and RS485 for RS485 readers; TCP/IP, with Wi-Fi as an option.
• ADMS (network data push to server), T9 text input, DST (daylight saving time), camera, 9-digit user IDs, access levels, groups, holidays, anti-passback, record query, tamper switch alarm and multiple verify modes; 91.93 x 202.93 x 21.5 mm.

What else you need

A 12 V DC 3 A supply. For door control, an electric lock, exit button and door sensor, and any Wiegand or RS485 reader, all ordered separately. A network point, or the optional Wi-Fi.

Installation

An access control installer should fit it. The job involves wall mounting at a height that suits the 2 m reading range, wiring 12 V DC, the lock, door sensor, exit button and any reader, connecting the network, then enrolling staff and adding it to the software.

Software and licences

It is managed from ZKTeco access control and attendance software over TCP/IP. Tell us which software you run and we will confirm compatibility in the quotation.

Before you buy

• For a quote, tell us whether you need the fingerprint module, which card frequency your site already uses (125 kHz EM or 13.56 MHz IC) and how many users you expect to enrol.
• Indoor use, 0 to 45 °C.