ZKTeco ProBio Plus Face and Fingerprint Attendance and Access Terminal

Overview

The ZKTeco ProBio Plus records attendance and opens the door from one wall unit, reading a face at a distance or a finger on its in-glass sensor, with card and password as alternatives. It suits offices, factories, hospitals and institutes that run shifts and want a flat, wipe-clean reader at the staff door. The ProBio Plus-QR variant swaps the fingerprint sensor for a QR code reader and the ProBio Plus-RFID variant reads face and card only.

Is it right for you?

• It suits a door where some staff prefer touchless face entry and others want a fingerprint.
• It holds 3,000 users, 3,000 faces, 3,000 fingerprints and 3,000 cards as standard; a higher capacity build raises users and cards to 10,000 and faces and fingerprints to 6,000.
• IP65 rated, so it can go on a sheltered outer door. It works from -5 to 45 °C.
• It suits a place that already issues HID Prox, Felica or DESFire cards, since card modules for those are offered.
• If you want visitor QR codes, choose the ProBio Plus-QR variant.

Key features

• Face in under 0.35 seconds at 50 to 200 cm and fingerprint in under 0.5 seconds, on ZKFace V3.9 and ZKFinger V10.0.
• Works in low light without a supplement light, with anti-spoofing against photo and video attacks.
• In-glass fingerprint sensor behind a 4-inch colour touch screen (480 × 800), leaving a flat face that is easy to wipe down.
• Stated accuracy: FAR (false acceptance rate) under 0.022% and FRR (false rejection rate) under 0.01% for face; FAR under 0.0001% and FRR 0.01% for fingerprint.
• Dual band Wi-Fi at 2.4 and 5 GHz, Bluetooth BLE 5.0, wired TCP/IP, Wiegand in and out, ZKTeco RS485 and USB.
• On-board electric lock, door sensor, exit button, auxiliary input, alarm output and wired doorbell terminals, with anti-passback and a tamper switch alarm.
• 200,000 transactions, AES256 and TLS 1.2 encryption, and a switch between AC Push and TA Push.
• Card options: 125 kHz ID or HID Prox, 13.56 MHz IC or Felica, or a dual frequency multi-tech module covering ID, IC and DESFire EV1/EV2.

What else you need

• A 12 V DC 3 A supply, which is listed as optional, so confirm it with your order.
• An electric lock, a door sensor (door position sensor) and an exit button.
• A card module matched to your card technology, since every card type is listed as an option.
• The Wi-Fi option, only if there is no network cable at the door.
• The secure relay board (SRB) option, only if you want the lock relay inside the secure side of the door.

Installation

An access control installer should fit it. The unit is 183 × 88 × 20.5 mm and wall mounts over an Asian or single gang box. The job covers the lock, door sensor, exit button, alarm, auxiliary and doorbell wiring, the network link and the software setup.

Software and licences

Works with ZKBio CVSecurity, Easy TimePro and Easy WDMS on premise, with the ZKBio Zlink cloud service, and with the ZKBio Zlink and ZSmart mobile apps. The video door phone and SIP client are optional functions, with ZSmart handling the intercom call. On the ProBio Plus-QR, dynamic QR codes come from the ZKBio CVSecurity mobile app.

Before you buy

• Choose the variant: ProBio Plus (face, fingerprint, card, password), ProBio Plus-QR (face, QR code, card, password) or ProBio Plus-RFID (face, card, password).
• Tell us your card technology, whether you need Wi-Fi, and whether you want the higher capacity build.
• WorkCode, SRB, video door phone and SIP client are options, not standard.