ZKTeco Saturn-F1000 Flap Barrier

Overview

The ZKTeco Saturn-F1000 is a flap barrier for indoor and semi-outdoor entrances that need a quick, orderly flow of people one at a time, such as office lobbies, factories and campuses. Its polycarbonate flaps retract in under 1 s once a card, QR code or face is accepted, passing up to 30 people per minute.

LED pictograms on the lid show whether the lane is on standby, open or closed, and a built-in speaker gives audible prompts.

Is it right for you?

• Suits a staffed or camera-monitored entrance that wants fast lanes with clear visual guidance for visitors.
• The IPX4 rating protects against splashes, so it suits semi-outdoor areas such as a covered gate, but not an exposed one.
• The 550 mm lane is sized for one walking person. For a wheelchair or trolley lane, pair it with a swing barrier such as the Saturn-S2000.
• It needs an access controller, since the barrier itself does not hold the user list.

Key features

• Opens and closes in under 1 s, for up to 30 people per minute with Radio Frequency Identification (RFID) cards or QR codes, or 15 per minute with face recognition.
• Five pairs of infrared sensors detect each passage, with anti-tailgating, anti-intrusion and wrong way entry alarms, and the flaps close automatically when nobody passes.
• Anti-pinch protection with infrared safety detection.
• DC brushless motor with a mean cycles between failures (MCBF) rating of 5 million, and a mean time to repair (MTTR) under 60 minutes.
• The flaps open automatically when the power is off, and a voltage free fire alarm input opens them on an alarm.
• 550 mm lane in a white cold rolled SPCC steel cabinet of 1,200 x 734 x 1,020 mm, with a polycarbonate and 2.5D tempered glass lid.
• IPX4 ingress protection, and CE and FCC certified.
• Fire alarm relay port and RS485 port on the motherboard, which handles access mode, anti-pinch and anti-tailgating settings.

What else you need

An access controller: a ZKTeco C3 or InBio series controller, or a third-party controller.

Readers for each direction. Under-mount options are a ProID series RFID reader or a QR500 QR code reader; a ProFace X, SpeedFace V5L or Elite Pass face terminal can be fitted on a mounting pole on top.

Mains power at the cabinet and cable ducts between cabinets.

Installation

A turnstile installer should fit it. The job involves fixing the cabinet to a level floor, running power, controller and fire alarm cabling through floor ducts, fitting the readers or face terminal, and configuring the passage mode, anti-pinch and anti-tailgating settings on the motherboard.

Software and licences

Managed in ZKBio CVAccess or ZKBio CVSecurity, depending on the access controller fitted.

Before you buy

• Tell us which credentials you want, RFID, QR code or face, so the matching reader or terminal can be supplied.
• Semi-outdoor use only, within the IPX4 rating.