ZKTeco SBTL3000 Swing Barrier Turnstile (Single Lane Set)

Overview

The ZKTeco SBTL3000 is a swing barrier lane that lets people through one at a time, supplied as a main unit plus a sub unit that together form one lane. It suits office lobbies, factory gates, metro and campus entrances that need orderly single-file entry rather than an open door, and its wide 600 to 900 mm passage makes it the usual choice where luggage, trolleys or wheelchairs must pass.

Is it right for you?

• It suits an entrance that needs wheelchair, trolley or luggage access, with a passage adjustable from 600 to 900 mm.
• It handles 30 people a minute normally closed or 50 a minute normally open.
• It is for indoor and sheltered outdoor use, working from -20 to 70 °C, with a heater advised below -20 °C.
• It takes its open signal from a reader or terminal, so it is ordered with face or fingerprint readers.
• For a single cabinet with two movements rather than a main and sub pair, the SBTL3200 is the dual-movement version.

Key features

• Passage width adjustable from 600 to 900 mm, wider than a typical tripod or flap barrier lane.
• Opening and closing time adjustable between 0.6 and 10 seconds on a DC brushless motor.
• Mechanical service life rated beyond 8 million cycles.
• SUS304 stainless steel cabinet in 1.2 and 0.8 mm sections.
• Transparent acrylic barrier arms as standard, with stainless steel arms available.
• Four infrared sensor pairs fitted, with ten positions reserved, so anti-tailgating and safety detection can be extended.
• Standard face recognition hole plug, internal wiring trough, RS232 and optional RS485.
• Each unit is 1200 × 150 × 987 mm, 28.5 kg main and 27 kg sub, on 220 V AC 50 Hz.

What else you need

• Face, fingerprint or card readers to give the open signal.
• ZKBio CVSecurity for access rules and attendance.
• 220 V AC mains at the lane.
• Floor cabling between the main and sub unit, and a heater if the lane sits below -20 °C.

Installation

A turnstile installer should fit it. The main and sub units bolt to the floor with the supplied expansion bolts, with cabling run between them through the internal wiring trough, mains connected, and readers mounted on the face recognition holes. The cabinet ships with side cover plates, maintenance wipes and a certificate of conformity.

Software and licences

Integrated with ZKBio CVSecurity for access rules and attendance through the readers fitted.

Before you buy

• Arm material, reader choice and installation vary by place, so tell us the number of lanes and the entry width you need.
• Sheltered outdoor use only.