ZKTeco EX86-S Stainless Steel Exit Button, 86 x 86 mm

Overview

The ZKTeco EX86-S is a push button for the inside of an access controlled door, so people can let themselves out without a card. It is a stainless steel button on the standard 86 x 86 mm plate, which mounts on an 86 type wall box with no cutting. Every access controlled door needs a release on the inside, and this is the common square-plate version.

Is it right for you?

• It suits a standard 86 type wall box in a corridor, office or lobby.
• Stainless steel survives high-traffic corridors better than plastic.
• It works with any access panel, standalone terminal or direct lock wiring, because the output is a plain NO/COM dry contact.
• For a narrow glass or aluminium door frame, the EX28-L is the slim version.
• If you want nothing to touch, the K1-1D is the touchless version.

Key features

• Stainless steel panel.
• 86 x 86 x 25 mm, sized to a standard gang box.
• NO/COM dry contact output.
• Rated for 500,000 operations (aging test qualified), so it is not the first thing to fail on a busy door.
• 12 V DC, matching the usual access control supply.
• Rated -20 to 55 °C and 0 to 95% relative humidity; 0.085 kg.

What else you need

An 86 type wall box, two-core cable to the exit input of the controller or to the lock circuit, and the 12 V DC access control supply. On a fire escape route, an emergency break glass unit alongside it so the door can still be released if the button or controller fails.

Installation

An access control installer or electrician can fit it. The button wires to the exit or release input on the controller, or in a simple installation it breaks the lock power circuit directly. Mount it on the 86 type box at a comfortable height beside the door.

Before you buy

• Check the wall box is an 86 type.
• Fit alongside an emergency break glass unit on an escape route.